Results 1 to 3 of 3
Thread: Prop ?
-
04-23-2013, 11:04 AM #1
Prop ?
What are some pros and cons of my prop 13x11.5 acme 3 blade.What kind of rpm range to stay in and top speeds for this setup,Iam new to these kind of setups just trying to gain some info.
2013 LSV
2006 outback DD sold
2004 Stingray 180LX sold
David
-
04-23-2013, 11:25 AM #2
The "standard" prop for years was an 13 x 13. It would allow a max RPM of 5,000 and top end around 42 mph (with some variation depending on weight and trim). You should have a little more hole shot and a little less top end. You might achieve a slightly higher RPM at WOT. I think your boat is supposed to max at 5,000 RPM. You can check your RPM and MPH at WOT and see what you get.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
04-23-2013, 09:54 PM #3Senior Member
- Join Date
- Jan 2008
- Location
- Pensacola, FL
- Posts
- 1,585
Contact OJ Props or Acme Props. Their reps are very good at telling the benefits of various props, especially for a DD boat that has been around for a while.
1997 MasterCraft 205
2008 Moomba Outback
1999 MasterCraft Sportstar OB
1992 MasterCraft 205
1999 Malibu Response LX
1987 Marlin Magnum Skier