![Moomba on Facebook Moomba on Facebook](/assets/images/chicklet_facebook.gif)
![Moomba on Twitter Moomba on Twitter](/assets/images/chicklet_twitters.gif)
![Moomba on Vimeo Moomba on Vimeo](/assets/images/chicklet_vimeo.gif)
![Moomba on Instagram Moomba on Instagram](/assets/images/chicklet_instagram.gif)
![Moomba on Blogger Moomba on Blogger](/assets/images/chicklet_blogger.gif)
Iam new to this kind of boat(2006 outback my first direct drive) can someone please explain how to grease my rudder and steering cable,and also what are some pros and cons of my prop 13x11.5 acme 3 blade.What kind of rpm range to stay in and top speeds for this setup,Thanks![]()
2013 LSV
2006 outback DD sold
2004 Stingray 180LX sold
David
Your steering cable cannot be lubricated. However some will chime in here and talk about drilling holes in the tube and jury rigging a way to lubricate it. The rudder has a grease fitting on the inside of the boat where it comes through the hull.
2013 LSV
2005 LSV - SOLD
You can open up the Gull Wings in back and unscrew the floor out in there and then you will see the grease fitting through the gas tank. Doesn't really take long at all!
Jack Beams
'05 Outback DD
325HP EFI Indmar
Opening up the floor is really quite simple as well ,just 4 screws hidden in the carpet , behind the motor clamshell.
07 Outback DD
You can take the floor out to change trans fluid and check dripless/ non dripless water seals and mufflers etc all at the same time as well....
07 Outback DD
Definitely worth learning how to take up the floor. Should be giving everything under there at least an annual inspection anyway.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
hardest part about taking up the floor is finding the screws hiding out in the carpet![]()
2007 Moomba Outback - going, going, GONE
2015 "NOT A MOOMBA"
Why Not? Play Hard! Get wet![]()