Results 1 to 10 of 15
Thread: Name these parts
-
04-20-2013, 08:22 PM #1Senior Member
- Join Date
- Jun 2008
- Location
- Eugene OR
- Posts
- 1,786
Name these parts
Ok so I was cleaning out the boat today and found two parts in the bottom of the bilge. I have no clue what they go for. The first is a bronze nut that is a 9/16. The second is a clip of some sort. Below is a photo of both of them. Any help would be great. I cannot find what they came off of and I have searched the boat up and down.
2008 Outback V - Sold but never forgotten.
“Do not wait; the time will never be “just right.” Start where you stand, and work with whatever tools you may have at your command, and better tools will be found as you go along." -Napoleon Hill
-
04-20-2013, 08:33 PM #2
never seen the clip before, but looks like something to hold two hoses apart ???
Hey, Its Moomba time
Its all about the dash - enjoy the dash, as that is your time between the dates
13 Mobius LSV-sold
08 Mobius LSV-sold
03 Mobius LSV-sold
life is about finding the balance between being a responsible adult and staying young at heart
-
04-20-2013, 09:01 PM #3Senior Member
- Join Date
- Jan 2008
- Location
- Pensacola, FL
- Posts
- 1,585
Looks like a nut and a dickfer.
1997 MasterCraft 205
2008 Moomba Outback
1999 MasterCraft Sportstar OB
1992 MasterCraft 205
1999 Malibu Response LX
1987 Marlin Magnum Skier
-
04-20-2013, 09:06 PM #4
-
04-20-2013, 10:01 PM #5
Re: Name these parts
What's a dickfer? Lol
Check your rudder assembly and possibly your engine mounts.
Sent from my XT907 using Tapatalk 2
PWI as usual...
-
04-20-2013, 10:04 PM #6
Im thining the bolt might be for the engine cover latch. I know on my LSV that thing was always vibrating lose and id find it in the bilge.
Wire item, IDK man id have to snoop around your boat to fine out what was missing, It does seem as if its something to hold hoses away from somethingMalo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
04-20-2013, 10:26 PM #7
You guys kill me.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
04-20-2013, 10:32 PM #8
Thats the nut that was holding the ball separator wire (the other item) to prevent ball contact on power turns and avoid overheating of the coolant
Last edited by DOCDRS; 04-20-2013 at 10:33 PM. Reason: probably in violation of one of Ed's rules
09 21v LAUNCH
99 Outback LS. Sold
run your engine after you change your oil
68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
Doug
-
04-21-2013, 11:00 AM #9
Name these parts
Check the fuel pump wires. The clip looks like a retaining clip for the connections.
CS
-
04-21-2013, 12:13 PM #10