Results 1 to 3 of 3
  1. #1
    Join Date
    Jun 2010
    Location
    Lake Houston
    Posts
    656

    Default 13 LSV ZLD mouting

    So here's how I mounted my zld in case anyone is doing this is the future. Just epoxied some erector set pieces on there. Used needle nose vise grips to hold while the epoxy was setting up.
    uploadfromtaptalk1366480775344.jpg
    2013 LSV
    2005 LSV - SOLD

  2. #2
    Join Date
    Nov 2003
    Location
    Land O Lakes, Florida
    Posts
    6,377

    Default

    I basically did the same, ran some short screws into the backside of the dash
    Hey, Its Moomba time

    Its all about the dash - enjoy the dash, as that is your time between the dates
    13 Mobius LSV-sold
    08 Mobius LSV-sold
    03 Mobius LSV-sold
    life is about finding the balance between being a responsible adult and staying young at heart

  3. #3
    Join Date
    Feb 2008
    Location
    Traverse City, MI
    Posts
    2,680

    Default 13 LSV ZLD mouting

    Quote Originally Posted by moombadaze View Post
    I basically did the same, ran some short screws into the backside of the dash
    That's how I did it on the LSV. Not sure where I want or how I'll mount the ZLD on my V.

    2013 Outback V

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •