Results 1 to 3 of 3
Thread: 13 LSV ZLD mouting
-
04-20-2013, 01:59 PM #1Senior Member
- Join Date
- Jun 2010
- Location
- Lake Houston
- Posts
- 656
13 LSV ZLD mouting
So here's how I mounted my zld in case anyone is doing this is the future. Just epoxied some erector set pieces on there. Used needle nose vise grips to hold while the epoxy was setting up.
uploadfromtaptalk1366480775344.jpg2013 LSV
2005 LSV - SOLD
-
04-20-2013, 08:42 PM #2
I basically did the same, ran some short screws into the backside of the dash
Hey, Its Moomba time
Its all about the dash - enjoy the dash, as that is your time between the dates
13 Mobius LSV-sold
08 Mobius LSV-sold
03 Mobius LSV-sold
life is about finding the balance between being a responsible adult and staying young at heart
-
04-20-2013, 09:02 PM #3