Results 1 to 2 of 2
Thread: Brake Caliper
-
06-02-2014, 10:32 AM #1Senior Member
- Join Date
- Apr 2012
- Location
- Bunker Hill, IL
- Posts
- 288
Brake Caliper
Was changing oil on the hubs of the boat this weekend and realize my inside of my boat rim had some scaring on it got looking at the break caliper and realized the casting is broke. So I removed it and caped the brake line for right now. Going to look on the internet for a new caliper I left UFP a message this morning. It seams they have two design (an old and new) I'm guessing I have the old design but I will see which one I have.
Here is a some pics
IMG_1286[1].jpgIMG_1287[1].jpg2007 supra 21v
-
06-02-2014, 02:05 PM #2
Thinking yours should be the DB35 - http://www.pacifictrailers.com/ufp-d...ads-db35-db42/
Only difference on those top 2 appears to be cast with zinc plating vs. all aluminum.
The 'old' system is the DB42 - which I have and has a 10.25" rotor. The 'new' DB35 have a 9.75" rotor.So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...