Results 1 to 3 of 3

Thread: Prop ?

  1. #1
    Join Date
    Mar 2013
    Location
    I live in Dora Al. Smith lake is my home lake
    Posts
    424

    Default Prop ?

    What are some pros and cons of my prop 13x11.5 acme 3 blade.What kind of rpm range to stay in and top speeds for this setup,Iam new to these kind of setups just trying to gain some info.
    2013 LSV
    2006 outback DD sold
    2004 Stingray 180LX sold

    David

  2. #2
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    14,071

    Default

    The "standard" prop for years was an 13 x 13. It would allow a max RPM of 5,000 and top end around 42 mph (with some variation depending on weight and trim). You should have a little more hole shot and a little less top end. You might achieve a slightly higher RPM at WOT. I think your boat is supposed to max at 5,000 RPM. You can check your RPM and MPH at WOT and see what you get.
    My Mom said I'm not allowed to get wet!
    2008 LSV (sold)
    2000 Outback LS (sold)
    LLTR!!!!!!!!



  3. #3
    Join Date
    Jan 2008
    Location
    Pensacola, FL
    Posts
    1,585

    Default

    Contact OJ Props or Acme Props. Their reps are very good at telling the benefits of various props, especially for a DD boat that has been around for a while.
    1997 MasterCraft 205

    2008 Moomba Outback
    1999 MasterCraft Sportstar OB
    1992 MasterCraft 205
    1999 Malibu Response LX
    1987 Marlin Magnum Skier

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •