Results 1 to 10 of 11
Thread: Fulton F2 Adapter Plate
-
04-18-2013, 10:52 AM #1Member
- Join Date
- Jul 2002
- Location
- Northern California (Seba
- Posts
- 91
Fulton F2 Adapter Plate
I am looking at putting on the Fulton F2 Jack and was wondering if the adapter plate is what they call the weld on plate? If not can someone point me in the correct direction of the plate. Thank you!
Lake Bound
2002 Moomba Outback LS
Indmar, Carb
-
04-18-2013, 12:32 PM #2
Boatmate has a bolt on plate. I think other vendors make something similar but not sure. Have you bought your jack yet?
-
04-18-2013, 01:46 PM #3So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
04-18-2013, 03:32 PM #4Member
- Join Date
- Jul 2002
- Location
- Northern California (Seba
- Posts
- 91
Thank you and no I haven't purchased yet do you have a suggestion?
Lake Bound
2002 Moomba Outback LS
Indmar, Carb
-
04-18-2013, 05:54 PM #5
Working on a group buy but nothing finalized yet. So might be able to save you a few bucks if you can hold off a little.
-
04-19-2013, 09:31 AM #6Member
- Join Date
- Jul 2002
- Location
- Northern California (Seba
- Posts
- 91
Do you know approximately how long before you order as my jack is broke and getting to the point where I am going to need it. Let me know always interested in savings! Thank you,
Lake Bound
2002 Moomba Outback LS
Indmar, Carb
-
04-22-2013, 10:01 PM #7Senior Member
- Join Date
- Feb 2005
- Location
- Ottawa, Ontario, Canada
- Posts
- 718
2005 XLV, upgraded ballast, Comptech swivel wakeboard and hydrofoil racks, Monster cargo bimini
-
04-22-2013, 10:03 PM #8
-
04-22-2013, 10:33 PM #9
-
04-24-2013, 01:01 AM #10Senior Member
- Join Date
- Feb 2005
- Location
- Ottawa, Ontario, Canada
- Posts
- 718
I am glad that I drilled instead of cut because I had to abort the F2 installation and reinstall the original jack for a while. The supplied split lock washers were very soft metal. They were too weak to tolerate anything near the needed torque. They spread during tightening and the result was two bent machine screws, one of which cracked and broke in the plate's threaded hole!
2005 XLV, upgraded ballast, Comptech swivel wakeboard and hydrofoil racks, Monster cargo bimini