Results 1 to 10 of 11
Thread: Adding Depth Guage to 07 OBV
-
05-20-2013, 05:43 PM #1Junior Member
- Join Date
- Apr 2013
- Posts
- 15
Adding Depth Guage to 07 OBV
Wondering if anyone has added a depth guage to 07 OBV or similar. Boat did not come with one. Would love any brand suggestions/hints/pictures etc... Dont mind putting in a thru hull just not really sure of best location and wiring etc... Also wonderng typical mounting location of the guage. Thx
-
05-20-2013, 06:59 PM #2
Gauge location - I actually moved my volt meter down so the depth gauge is right up on top and easy viewing. That's one gauge I always want to be able to see and hear the alarm.
Transducer location should be in front of any water pickups on the bottom of the boat. You don't want anything that will cause turbulence or bubbling in front of it or that will throw off the signal if it's a thru-hull puck style. In the bilge area close to the V of the bottom is where mine is located.
I am very tempted to move to one of the Faria style depth gauges that actually uses a sensor drilled through the hull and also provides water temp as well. My thru-hull puck can be finicky sometimes and has even broken loose once. I've heard nothing but good things about the other one - as long as you don't mind drilling holes in your boat.So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
05-20-2013, 09:16 PM #3Senior Member
- Join Date
- Jan 2008
- Location
- Pensacola, FL
- Posts
- 1,585
https://forum.moomba.com/showthread....t=depth+finder
Here is where I mounted mine. I used a through hull and it has performed perfectly. I bought this one as I thought it matched the factory gauges best.
The search function will bring up several other threads for more/better ideas1997 MasterCraft 205
2008 Moomba Outback
1999 MasterCraft Sportstar OB
1992 MasterCraft 205
1999 Malibu Response LX
1987 Marlin Magnum Skier
-
05-21-2013, 01:03 AM #4Junior Member
- Join Date
- Apr 2013
- Posts
- 15
Thanks. Yes that is the one I have been looking at as well. On the price hunt now. I am installing the 2 thru hulls for my 2 new reversable pumps so I will look to mount the transducer forward of those close to center of hull.
-
05-21-2013, 10:32 AM #5
I also installed the same Humminbird in my 2010 OBV. Used the thru hull puck with good results. Mine is mounted on the driver's side directly across from the speedometer wheel. That put it in front of the two ballast thru hulls on that side. I used a 10 minute two part epoxy to set it. If your layout is different from the 2010's, you can disconnect your bilge pump, and fill the billge with a few inches of water. As your driving your boat around, you can move the puck around to find the best spot for good readings. The sonar will not go through air, but it will go through the combination of water in the bilge and the bottom of the boat.
Joe
2014 LSV
2010 Outback V - Sold
1993 Echelon
-
05-21-2013, 11:35 AM #6Banned
- Join Date
- Oct 2005
- Location
- Durham, NC
- Posts
- 649
Berg,
You have Perfect Pass, right? It has a water temperature reading. Well, the paddle wheel version does, I guess the Stargazer doesn't.
-
05-21-2013, 01:21 PM #7
Yup- Stargazer - no paddle wheel, no temp.
My current depth finder I'm not fond of at all. It was a night before leaving on vacation, crap this is the only one in stock at West Marine, it'll have to do - kind of purchase and install basically in the dark and let the epoxy cure overnight. It serves the purpose, that's about it.
Thing is with the water temp I'm sure my family will constantly want a report before they get in. Bunchy of sissies.So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
05-21-2013, 01:34 PM #8Senior Member
- Join Date
- Jan 2008
- Location
- Pensacola, FL
- Posts
- 1,585
Won't it always just read "cold"?
1997 MasterCraft 205
2008 Moomba Outback
1999 MasterCraft Sportstar OB
1992 MasterCraft 205
1999 Malibu Response LX
1987 Marlin Magnum Skier
-
05-21-2013, 01:41 PM #9
Yeah, doesn't look like FREEZING will fit on the display...
So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
05-21-2013, 10:16 PM #10Member
- Join Date
- Jun 2008
- Location
- Trussville, AL
- Posts
- 88