Results 1 to 8 of 8
  1. #1
    Join Date
    Apr 2009
    Location
    Raleigh, NC
    Posts
    48

    Default LSV locker support screw anchors

    I'm getting the upholstery on my LSV locker tops and engine cover replaced by a neighbor. I took some of the upholstery off of one of the lockers. I had a problem removing some of the screws that hold the strut support bracket to the aluminum board. The threaded tube thing that the screws anchor into had rusted a bit. I need to replace the threaded tube thing, but I don't know what it is called. From the side, it is T shaped. From the top it is circular with a hole in the middle. Also, it has 3 teeth on the edges of the circle that sink down into the aluminum board when it is tightened. Can someone tell me what to look for?

    Thanks
    05 Mobius LSV - gravity 3 ballast and wake plate
    single axle trailer
    DIY hot water shower installed
    DIY tube inflator installed

  2. #2
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    12,964

    Default

    Why not take a minute and shoot a pic of the part and post it up here?
    My Mom said I'm not allowed to get wet!
    2008 LSV
    2000 Outback LS (sold)
    Exile Tunes
    P5 Danielo Diamond 58"
    PWI
    LLTR!!!!!!!!



  3. #3
    Join Date
    Apr 2009
    Location
    Raleigh, NC
    Posts
    48

    Default

    Unfortunately, I already threw them away.
    05 Mobius LSV - gravity 3 ballast and wake plate
    single axle trailer
    DIY hot water shower installed
    DIY tube inflator installed

  4. #4
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    8,170

    Default

    Drew
    2016 Supra SA 450
    2015 Supra SG 450
    2012 Moomba Mojo
    2008 Moomba OBV

  5. #5
    Join Date
    Jul 2008
    Location
    Des Moines, IA
    Posts
    3,156

    Default

    I think you are describing tee nuts: http://www.lowes.com/Fasteners/Nuts/..._/N-1z0yk2d/pl#!

  6. #6
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    8,170

    Default

    Drew
    2016 Supra SA 450
    2015 Supra SG 450
    2012 Moomba Mojo
    2008 Moomba OBV

  7. #7
    Join Date
    Apr 2009
    Location
    Raleigh, NC
    Posts
    48

    Default

    Quote Originally Posted by brain_rinse View Post
    I think you are describing tee nuts: http://www.lowes.com/Fasteners/Nuts/..._/N-1z0yk2d/pl#!
    Those are the ones! Thanks!
    05 Mobius LSV - gravity 3 ballast and wake plate
    single axle trailer
    DIY hot water shower installed
    DIY tube inflator installed

  8. #8
    Join Date
    Jul 2008
    Location
    Des Moines, IA
    Posts
    3,156

    Default

    LOL Drew!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •