Results 1 to 7 of 7
Thread: sanding
-
04-10-2013, 12:36 PM #1
sanding
has anyone done a how to on properly sanding, waxing, and buffing the sides of the boat yet? my blue is starting to fade in the back, along with some light scuffs from the boards hitting it and i wanna bring the color back to life.
2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
Rockford fasgate cabins
Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
Exile XM7's
Exile Harpoon
Exile ZLD
Polk 10in sub (2)
Polk P330 amp (subs)
-
04-10-2013, 12:46 PM #2
I posted some good links a while back. Try searching "wet sand" or "wet sanding" "gel coat". Good luck!
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
04-10-2013, 12:48 PM #3
This could be a good place to start:
https://forum.moomba.com/showthread....ir-restorationMy Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
04-10-2013, 01:31 PM #4
ohh i forgot about 98roo's thread..i guess im just a little scared to sand down the sides of my boat haha
2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
Rockford fasgate cabins
Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
Exile XM7's
Exile Harpoon
Exile ZLD
Polk 10in sub (2)
Polk P330 amp (subs)
-
04-10-2013, 01:33 PM #5
I did it to my Outback. It was some serious work but I started in Feb. and would do a section at a time and buff it out. Get good quality paper and use it in the right order and you'll be very happy!
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
04-10-2013, 01:40 PM #6
yeah, get a random orbit sander, some paper and a few cold ones and bring the shine back to your ride.
-
04-10-2013, 01:41 PM #7
sounds like a plan
2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
Rockford fasgate cabins
Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
Exile XM7's
Exile Harpoon
Exile ZLD
Polk 10in sub (2)
Polk P330 amp (subs)