Results 1 to 8 of 8
  1. #1
    Join Date
    Apr 2009
    Location
    Raleigh, NC
    Posts
    62

    Default LSV locker support screw anchors

    I'm getting the upholstery on my LSV locker tops and engine cover replaced by a neighbor. I took some of the upholstery off of one of the lockers. I had a problem removing some of the screws that hold the strut support bracket to the aluminum board. The threaded tube thing that the screws anchor into had rusted a bit. I need to replace the threaded tube thing, but I don't know what it is called. From the side, it is T shaped. From the top it is circular with a hole in the middle. Also, it has 3 teeth on the edges of the circle that sink down into the aluminum board when it is tightened. Can someone tell me what to look for?

    Thanks
    05 Mobius LSV - gravity 3 ballast and wake plate
    single axle trailer
    DIY hot water shower installed
    DIY tube inflator installed

  2. #2
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    14,071

    Default

    Why not take a minute and shoot a pic of the part and post it up here?
    My Mom said I'm not allowed to get wet!
    2008 LSV (sold)
    2000 Outback LS (sold)
    LLTR!!!!!!!!



  3. #3
    Join Date
    Apr 2009
    Location
    Raleigh, NC
    Posts
    62

    Default

    Unfortunately, I already threw them away.
    05 Mobius LSV - gravity 3 ballast and wake plate
    single axle trailer
    DIY hot water shower installed
    DIY tube inflator installed

  4. #4
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    8,419

  5. #5
    Join Date
    Jul 2008
    Location
    Des Moines, IA
    Posts
    3,237

    Default

    I think you are describing tee nuts: http://www.lowes.com/Fasteners/Nuts/..._/N-1z0yk2d/pl#!

  6. #6
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    8,419

    Default


  7. #7
    Join Date
    Apr 2009
    Location
    Raleigh, NC
    Posts
    62

    Default

    Quote Originally Posted by brain_rinse View Post
    I think you are describing tee nuts: http://www.lowes.com/Fasteners/Nuts/..._/N-1z0yk2d/pl#!
    Those are the ones! Thanks!
    05 Mobius LSV - gravity 3 ballast and wake plate
    single axle trailer
    DIY hot water shower installed
    DIY tube inflator installed

  8. #8
    Join Date
    Jul 2008
    Location
    Des Moines, IA
    Posts
    3,237

    Default

    LOL Drew!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •