Results 1 to 6 of 6

Thread: Cooler removal

  1. #1
    Join Date
    Aug 2011
    Posts
    2,522

    Default Cooler removal

    Had some warmer weather today so I removed the cooler from my lsv. Getting ready for my new ballast setup..

    Die grinder & sawzall




    Sent from my Nexus 4 using Tapatalk 2
    Attached Images Attached Images
    http://www.instgram.com/jlyons30
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV - Sold
    2017 Moomba Craz - Enzos, Lead

  2. #2
    Join Date
    Aug 2012
    Location
    I live in Bostic, NC. I normally boat on lake James in Marion, NC
    Posts
    117

    Default

    very nice. i was thinking about taking my cooler out in my xlv. was gonna put 3 more batts back there for more engine off play time
    2011 Xlv with 325hp and stock Gravity lll

  3. #3

    Default

    Nice ill be doing the same in the next few weeks 370 sac there I guess are you integrating it into your existing system or using a tsunami pump

  4. #4
    Join Date
    Aug 2011
    Posts
    2,522

    Default Re: Cooler removal

    All new system with 4 reversible pumps..

    Sent from my Nexus 4 using Tapatalk 2
    http://www.instgram.com/jlyons30
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV - Sold
    2017 Moomba Craz - Enzos, Lead

  5. #5
    Join Date
    Feb 2010
    Location
    Canton, Ga / Lake Lanier
    Posts
    1,600

    Default Cooler removal

    Mine's gone...cut it out last summer...in the dark...best mod I've done....


    Sent from my iPhone using Tapatalk
    SOLD! 2011 Mobius LSV 325HP EFI
    Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537

    Board: '12 LF Harley (Monster) 139
    Her Board: '11 Ronix Krush 128
    Kids Board: '13 Ronix Vision 120
    Skate: LF Faction 44
    Surf: LF Custom Quad & XXX


    Tow Rig:
    2011 Toyota Tundra CrewMax TRD Magnetic Grey
    3/1 Truxx Lift, and some other stuff...

  6. #6
    Join Date
    May 2009
    Location
    North End Lake Lanier GA
    Posts
    8,155

    Default

    I removed the one on the LSV as well last summer. Was no much nicer having the extra storage room.

    New owner was glad it was gone as well.

    I will however CAUTION you... If you run a ballast bag up there you need to figure out a way to mount a L brackit or something.

    I was running a 450 bag for a while, and with that plus people siting on that side of the boat, the fiberglass bowed out almost 1/2inch from it normal sitting place. I have to push it back in and get it lined back up to its original place. The cooler is providing some anti-flex to that section of the boat.

    Might be as easy as taking some aluminum L brace and epoxy them to the inside wall of that area, or mount it to the under side of the lip and to the floor.
    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
    [COLOR="#696969"]

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •