Results 1 to 3 of 3
Thread: Installing a tower
-
03-23-2013, 05:00 PM #1Junior Member
- Join Date
- Aug 2012
- Posts
- 14
Installing a tower
I have a 98 Boomerang that I want to install a Aerial Ascent Tower on.
Has anyone ever installed a tower on an older boat like that?
Do you have to line he pull points up with the existing ski pole position or can you push the tower a little further back so that the mounting points bolt into the square/strait sections of the hull?
Any comments would be appreciated.
-
03-25-2013, 11:03 AM #2
Try sending a PM to "Cham". Charlie put a tower on an older Boomerang. There's a pic of it on the Monster website I think.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
03-25-2013, 12:01 PM #3Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
I installed that tower on my old seadoo...You can put the tower anywhere but you should add some re-enforcement under the tower feet.
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead