Results 11 to 20 of 48
Thread: Plasti Dip your boat letters
-
03-05-2013, 03:12 PM #11
Mike, great write up Mojo looks aewsome. Ian already did the xm9s so i bet those 3 pairs are next, unless Brian got in the black grills....
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
03-05-2013, 04:30 PM #12
here yah go...
http://www.wakeworld.com/forum/showthread.php?t=797125David
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
03-05-2013, 04:38 PM #13
That orange tower is pretty dang cool.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
03-05-2013, 05:09 PM #14
nice write up Mike.
Looks greatHey, Its Moomba time
Its all about the dash - enjoy the dash, as that is your time between the dates
13 Mobius LSV-sold
08 Mobius LSV-sold
03 Mobius LSV-sold
life is about finding the balance between being a responsible adult and staying young at heart
-
03-05-2013, 05:27 PM #15Hey, Its Moomba time
Its all about the dash - enjoy the dash, as that is your time between the dates
13 Mobius LSV-sold
08 Mobius LSV-sold
03 Mobius LSV-sold
life is about finding the balance between being a responsible adult and staying young at heart
-
03-05-2013, 05:33 PM #16
Plasti Dip your boat letters
It's too cold!! But this weekend is promising but it would require me to bring the boat back to my house from storage (30 miles one way) and then take it back. No real interest in sitting at storage for hours while doing that. I'll do it the next time I have a reason to bring it home.
Well, Drew, looks like that's one more!
Sent from my iPhone using TapatalkSOLD! 2011 Mobius LSV 325HP EFI
Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537
Board: '12 LF Harley (Monster) 139
Her Board: '11 Ronix Krush 128
Kids Board: '13 Ronix Vision 120
Skate: LF Faction 44
Surf: LF Custom Quad & XXX
Tow Rig:
2011 Toyota Tundra CrewMax TRD Magnetic Grey
3/1 Truxx Lift, and some other stuff...
-
03-05-2013, 05:39 PM #17
-
03-05-2013, 05:40 PM #18
Plasti Dip your boat letters
SOLD! 2011 Mobius LSV 325HP EFI
Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537
Board: '12 LF Harley (Monster) 139
Her Board: '11 Ronix Krush 128
Kids Board: '13 Ronix Vision 120
Skate: LF Faction 44
Surf: LF Custom Quad & XXX
Tow Rig:
2011 Toyota Tundra CrewMax TRD Magnetic Grey
3/1 Truxx Lift, and some other stuff...
-
03-05-2013, 08:39 PM #19
Jpetty, yes thanks, I wanted to post that pic and i did it like that on those to help show a how not to tape it off LOL. I was a great learning experience and i was glad to do it.
Kane, it took me a good 6-8 hours from starting to mask to clean up. Painting only takes about 15 minutes a coat but at 8 coats, that's still 2 hours just painting. As i got more and more coats i would let them dry a little longer.
Nash you will want a place in the 60s to paint in. If its too cold the plasti dip doesn't set well.
KG idk if you really want to do a tower in this stuff. The problem i see is, once you get a good scratch in it you will have to repaint it. Also i haven't read the WW threads but i herd it wasn't doing so well on towers.Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
03-05-2013, 10:35 PM #20