Results 1 to 10 of 15
Thread: Impeller Puller
-
03-03-2013, 10:05 PM #1
Impeller Puller
I am looking at buying an impeller puller to make my life a lot easier. I found two puller online, one by
Sea-Dog Stainless Steel Impeller Puller for $44.99 and Jabsco Flexible Impeller Puller for $89.99. Can anyone tell me if the Sea-Dog SS Impeller puller is worth the money or just spend the extra money for the Jabsco puller?
Jabsco
http://www.overtons.com/modperl/prod...r&merchID=4005
Sea-Dog
http://www.overtons.com/modperl/prod...r&merchID=4005
Thanks,
Mike2007 Moomba Outback V
-
03-04-2013, 02:16 AM #2
Yikes... Instead of $50-90 I'm thinking something like this along with a little WD-40 would do the trick.
http://www.sears.com/great-neck-bent...4&blockType=G4
Unless you plan to be pulling a lot of impellers.So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
03-04-2013, 08:48 AM #3
Never used a puller myself, 2 screwdrivers and a pair of pliers and a little brute force and out it comes
Hey, Its Moomba time
Its all about the dash - enjoy the dash, as that is your time between the dates
13 Mobius LSV-sold
08 Mobius LSV-sold
03 Mobius LSV-sold
life is about finding the balance between being a responsible adult and staying young at heart
-
03-04-2013, 09:51 AM #4
Spray the impeller shaft with WD40, pull the coil wire off, bump the motor over a few times, then I use 2 paint can openers to pull it out....
-
03-04-2013, 11:31 AM #5
-
03-04-2013, 12:21 PM #6
Mine new one always seems to come with a little packet of silicone lube to lube it up for reinstall.
I used the dual vice grip method, oil, bump, install two pairs of vice grips 180 degrees from each other and pull like hell...sometimes it may not be useable as a back up when it gets out but it gets it out...David
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
03-04-2013, 02:25 PM #7Senior Member
- Join Date
- Jun 2010
- Location
- Lake Houston
- Posts
- 656
Re: Impeller Puller
Two paint can openers works perfect
2013 LSV
2005 LSV - SOLD
-
03-04-2013, 02:46 PM #8David
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
03-05-2013, 11:21 AM #9Senior Member
- Join Date
- Jun 2010
- Location
- Lake Houston
- Posts
- 656
Re: Impeller Puller
Lol I wasn't really directing my comment towards you David I actually have done it with pliers as well and that ultimately worked too
2013 LSV
2005 LSV - SOLD
-
03-05-2013, 12:39 PM #10
Impeller Puller
What ever brad. I know you were taking cheap shots at me....
Just kidding
Sent from my iPhoneDavid
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD