Results 1 to 4 of 4
Thread: Kick Panel/Foot Rest
02-26-2013, 08:49 PM #1Member
- Join Date
- Jul 2008
- Kerr Lake, VA via Durham, NC
Kick Panel/Foot Rest
I'm waiting on all the parts for my stereo install and have gotten basically everything planned (thank you forum) but was hoping to get a little confirmation. I am trying to figure out what is under the kick panel/foot rest of my 2007 LSV. I have found some similar posts that show there being a floor below the existing floor and it basically being hollow, but none from a 07 LSV. Just wondering if anyone knew for sure and if it was like this post below?
Gravity III w/ 750's and IBS, Acme 1433
WS-420SQ, Kicker KM6500.2, JL e4300, JL 12w6v2, JL e1400D, Polk db651s, JL JX360/4
02-26-2013, 10:44 PM #2
That's exactly how my 2007 obv looked , pretty sure your Lsv is the same , hollow cavity with. A conduit to the main floor and to the ski locker.A Day at the Lake...Priceless
A Day in Powder...Endless
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
02-27-2013, 01:26 PM #3
If the 07 and 08 are the same, check out Newty's mods album here -
Has some foot rest area cut away shots.The years have been kind, it's the weekends that have done the damage.
2001 MobiusV - Slightly Modified...
02-27-2013, 03:12 PM #4
it was a little scary with the first cut, but after that, it's easy and just made a big fat mess. good luck. I'm not sure why so many want to keep the hump as it's really in the way and from what I saw, made no difference in overall hull/boat integrity. was all cosmetic.'06 Supra Launch 20SSV-gone but never forgotten