Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 25
  1. #11
    Join Date
    Aug 2011
    Posts
    2,522

    Default Re: LED Light Project

    Inspiration..

    https://www.youtube.com/watch?v=MX1O...e_gdata_player

    Sent from my Nexus 4 using Tapatalk 2
    http://www.instgram.com/jlyons30
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV - Sold
    2017 Moomba Craz - Enzos, Lead

  2. #12
    Join Date
    Mar 2011
    Location
    Belton, Texas
    Posts
    2,607

    Default LED Light Project

    I'm not looking at doing anything in the water. just wanna throw some strips in the interior along the sides, bow, foot well where sub is and maybe the drink holders


    sent from my home phone
    Jason

    Go Hard or Go Home.......it's MOOMBA time!!

    2009 Moomba Mobius LSV

  3. #13
    Join Date
    Mar 2010
    Location
    Arkansas
    Posts
    3,952

    Default Re: LED Light Project

    Oznium seemed to make a pretty good strip. I've been happy with mine but haven't looked at anything else.

    Dusty replaced our courtesy lights with single matching bulbs and tied it all into courtesy. Simple but effective.

    Sent from my DROID RAZR using Tapatalk 2
    2016 Moomba Mojo
    2006 Supra 24SSV - Traded

  4. #14
    Join Date
    Oct 2010
    Location
    Lake Wylie NC Area
    Posts
    2,467

    Default

    Quote Originally Posted by jpetty3023 View Post
    I'm not looking at doing anything in the water. just wanna throw some strips in the interior along the sides, bow, foot well where sub is and maybe the drink holders


    sent from my home phone
    The thin silicone encapsulated cut to length every 3 LEDs are great for speaker and cup-holder rings, but are not robust enough IMO, to do along the floor or anywhere that they might be contacted by occupants or gear. I would suggest a more rigid strip or pod.

  5. #15
    Join Date
    Jan 2013
    Posts
    10

    Default

    KG, do you have a supplier for the courtesy light replacement led's? I want to pull those dingy bulbs and getting something that is brighter.

    Bill D.

  6. #16
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    6,368

    Default LED Light Project

    Quote Originally Posted by txnight View Post
    KG, do you have a supplier for the courtesy light replacement led's? I want to pull those dingy bulbs and getting something that is brighter.

    Bill D.
    What he said ^


    Sent from my iPhone
    David

    2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights

    SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD

  7. #17
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    7,692

    Default

    times 2 ...........
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  8. #18
    Join Date
    Mar 2010
    Location
    Arkansas
    Posts
    3,952

    Default

    We used the prewired super flux. Just spliced the factory wire and put these in its place.

    http://www.oznium.com/prewired-superflux

    Some pics from ours that got archived









    "I've had a few PM's from people asking about the LED's and what all we did, so I figured I would just post my process. Everything is powered by the factory courtesy light wiring, off of that switch, even what we added. For above the cup-holders, the Supras already had a small 3 LED unit above them, I removed this and just replaced with flexible strip. Wired directly in place of the old. Same for rear lockers, behind the driver seat locker, and the rear transom light. The only change to the wiring for the lockers was the ground wire was ran to the switch, and another ground from the switch back to the LED so when closed, the ground was interrupted and they shut off. "
    Last edited by KG's Supra24; 02-15-2013 at 11:15 AM.
    2016 Moomba Mojo
    2006 Supra 24SSV - Traded

  9. #19
    Join Date
    Mar 2010
    Location
    Arkansas
    Posts
    3,952

    Default

    I can't remember if there are 1 or 2 superflux in each of the factory housings in the floor. Dusty, remember?

    If you are considering doing RGB at all .... just do it up front.
    2016 Moomba Mojo
    2006 Supra 24SSV - Traded

  10. #20
    Join Date
    Mar 2011
    Location
    Belton, Texas
    Posts
    2,607

    Default LED Light Project

    so KG your entire LED system is on/off by the acc switch. you have no remotes or power sources etc. just the lights and the pig tail connectors?


    sent from my home phone
    Jason

    Go Hard or Go Home.......it's MOOMBA time!!

    2009 Moomba Mobius LSV

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •