Page 6 of 14 FirstFirst ... 45678 ... LastLast
Results 51 to 60 of 134

Thread: Plasti Dip

  1. #51
    Join Date
    Mar 2011
    Location
    Belton, Texas
    Posts
    2,607

    Default Plasti Dip

    Quote Originally Posted by Boonejeepin View Post
    Picked up an can and dipped my company car emblems.

    Cool stuff!Attachment 16745
    looks great and to easy right?


    sent from my home phone
    Jason

    Go Hard or Go Home.......it's MOOMBA time!!

    2009 Moomba Mobius LSV

  2. #52
    Join Date
    Jul 2011
    Location
    Murrieta, CA
    Posts
    1,590

    Default Plasti Dip

    Very easy. I found that I don't need to tape close at all. It does help to have a little warmth to the air. It did not want to cure with the garage around 50 degrees. I warmed it with a hair dryer for a couple of minutes and then it was good to go.

    If I had the chrome Moomba letters I would be all over it.
    2018 Max with a little extra weight here and there

  3. #53
    Join Date
    Mar 2011
    Location
    Belton, Texas
    Posts
    2,607

    Default Plasti Dip

    same here, the letters are gonna look to good blacked out


    sent from my home phone
    Jason

    Go Hard or Go Home.......it's MOOMBA time!!

    2009 Moomba Mobius LSV

  4. #54
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    14,071

    Default

    Easier than washing anyway.
    My Mom said I'm not allowed to get wet!
    2008 LSV (sold)
    2000 Outback LS (sold)
    LLTR!!!!!!!!



  5. #55
    Join Date
    Jun 2007
    Location
    Vancouver, WA
    Posts
    5,456

    Default

    So the consensus is this (the spray kind) won't hold up well to high traffic or highly handled / wear and tear items?
    So when is this "old enough to know better" supposed to kick in?

    2001 MobiusV - Slightly Modified...

  6. #56
    Join Date
    Jul 2011
    Location
    Murrieta, CA
    Posts
    1,590

    Default Plasti Dip

    It is tuff but I think it would need to be pretty thick for a wear area.
    2018 Max with a little extra weight here and there

  7. #57
    Join Date
    Mar 2011
    Location
    Belton, Texas
    Posts
    2,607

    Default Plasti Dip

    I think if you put enough coats on it will be fine. my front emblem and light covers have been on highways speeds and high pressure car wash with numerous direct hits from power washer hose and no issues. did a skate board for kids and no issues so far either. if it does come off in a spot or two it's easy to fix, just touch up with your can of plasti


    sent from my home phone
    Jason

    Go Hard or Go Home.......it's MOOMBA time!!

    2009 Moomba Mobius LSV

  8. #58
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    8,419

    Default

    Quote Originally Posted by Boonejeepin View Post
    If I had the chrome Moomba letters I would be all over it.
    Man, I want to do it, but I dropped some $80 on the chrome reg numbers and I'm worried the DNR won't go for those being blacked out on the black part of the hull. Do you guys that have used it think it will work on the "MOOMBA" decals on the transom and the "MOJO" on the rear sides, too? It's more of a domed sticker material than the side chrome ones.

  9. #59
    Join Date
    Mar 2011
    Location
    Belton, Texas
    Posts
    2,607

    Default Plasti Dip

    I think it would work fine drew.

    with your reg numbers up front you can spray them black then use a plastic razor blade and trim about an inch around so that way you have part chrome part black to add a little "pop" to the reg numbers.( like boone's Chevy emblem) or you can black out and it water cops tell ya it's a no go just remove the plasti


    sent from my home phone
    Jason

    Go Hard or Go Home.......it's MOOMBA time!!

    2009 Moomba Mobius LSV

  10. #60
    Join Date
    Mar 2010
    Location
    Arkansas
    Posts
    3,952

    Default

    Worked on my stapler ... I bet you will be fine.


    2016 Moomba Mojo
    2006 Supra 24SSV - Traded

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •