Results 171 to 180 of 257
-
04-21-2013, 06:57 AM #171
[QUOTE=ian ashton;212443]I got a few deliveries today; inspired by another post on here, I am going to install a heater vent behind the drivers seat, so I ordered a matching Hot Tube with chrome ring from HeaterCraft;
How does that work? Do you just Y off one of the (2) existing tubes?'06 Outback - Gone but not forgotten
'13 Mojo
-
04-21-2013, 07:08 AM #172
The countdown begins; my 2013 Outback V...
Exactly - I'm going to use PVC pipe, this way I don't have to worry about puncturing the tube that will run through a storage area.
2013 Outback V
-
04-21-2013, 07:26 AM #173
-
04-21-2013, 07:49 AM #174
-
04-21-2013, 07:56 AM #175
-
04-21-2013, 08:07 AM #176
Ian , when I did my obv with the 4 port heater, I loved having a vent at the drivers feat. Two in the walkway and one behind the drivers seat.
wish my xlv had 4 , they put the heater on the port side, making it difficult to get fix heat to the starboard side.
let us know how the wye tube works with the air flow.A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
04-21-2013, 08:09 AM #177
The countdown begins; my 2013 Outback V...
Will do - my '08 had 3 ports, the '13 only has 2. I figure if its not enough with the Y I'll swap out the blower box thingie.
2013 Outback V
-
04-22-2013, 06:36 PM #178
The countdown begins; my 2013 Outback V...
Trailer is painted and looking good!
2013 Outback V
-
04-23-2013, 09:50 PM #179
The countdown begins; my 2013 Outback V...
Got some photos of the progress; sounds like I'll be getting the boat back on Friday.
Primed;
Taped up, ready for black gel coat;
Black sprayed;
Ready for sanding and polishing;
2013 Outback V
-
04-23-2013, 10:20 PM #180
The countdown begins; my 2013 Outback V...
Looks like they're doing a great job on the repairs.