Results 1 to 10 of 29
Thread: Price for a Vinyl Replacement
-
01-10-2013, 01:50 PM #1
Price for a Vinyl Replacement
I am starting to shop around for vinyl replacement places in Raleigh NC. I know the prices will vary based on where you are, but would anyone be willing to share what they paid to have their interior re-done? I am looking at all the vinyl (see http://bkearney.fedorapeople.org/vinyl/), average quality vinyl. PM's or public would be appreciated.
2003 Mobius LSV Gravity Games
Total Noob running 1100 in the center, 750s in the lockers.
JL JX360/4 powering 6 Infinity 621m speakers
-
01-10-2013, 01:57 PM #2
On my Outback I did mine for under $800 but I bought my material at greatlakesskipper.com and did all the pulling, staple pulling, etc. myself. I had an upholstery guy make new covers using the old ones as patterns. I put 'em on and put it all back together. Fun winter project but great results.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
01-10-2013, 05:36 PM #3
-
01-10-2013, 06:57 PM #4
-
01-10-2013, 09:50 PM #5
Skiers charges a good deal for the skins. I would rather have a shop make them up and use a heavier vinyl in the process
Sent from my iPhone newtys droid killer using TapatalkDavid
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
01-11-2013, 02:21 AM #6
David X2. Better vinyl can be bought through an upholsterer. I will eventually get all of the cushions replaced.
1998 Mobius
310 HP PCM
SOLD
-
01-11-2013, 09:43 AM #7
That amount was for the whole job but I did great on the material and found a guy who needed the work to make my covers.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
01-11-2013, 10:40 AM #8
Pulling staples sucks balls seriously. I do not wish that job on anybody.
I did my complete interior myself, went to walmart bought a sewing machine then off to the fabric store for some vinyl.
It's not a $50,000 boat job but I think it turned out great for my boat.-Mark
14 Mojo - 72 hours and growing
02 Mobius LSV ---- Sold and always will be remembered as the one that started it all.
"Hey you only live once"
-
01-11-2013, 01:05 PM #9
-
01-11-2013, 01:06 PM #10