Results 1 to 2 of 2
-
10-20-2005, 03:24 PM #1Member
- Join Date
- May 2005
- Posts
- 62
Adding a Ballast System in Ski Locker
During the "off season" I am going to add a ballast tank to the ski locker in my Mobius LS. My plan is "T" off the existing pump in the engine compartment to go to the ski locker and then "T" into the bilge pump line to pump the water out.
My question to those who have the ballast system in the ski locker is how do you get the 2 lines (in and out) from the engine compartment to the ski locker? I believe there is an existing hole with some sort of plastic piece in the hole, do you use this or drill new holes? Needless to say, I am very nervous about drilling holes in my boat.
Thanks
-
10-21-2005, 09:40 AM #2Senior Member
- Join Date
- Sep 2002
- Location
- Pennsylvania
- Posts
- 106
Replying to Topic 'Adding a Ballast System in Ski Locker'
AZ_Calling, It is just a plastic tub that lines the ski locker, you can pop right through it with a hole saw. Follow your battery cables it should give you an idea of what you are dealing with.
Good luck,E
Similar Threads
-
Adding factory-style ballast to center ski locker?
By iaonbb in forum General ChatReplies: 8Last Post: 11-22-2006, 02:37 PM -
adding on to factory ballast system
By pickle311 in forum General ChatReplies: 2Last Post: 01-27-2006, 05:25 PM -
Outback Owners..Ballast in Ski Locker?
By e420x in forum General ChatReplies: 5Last Post: 09-28-2005, 03:38 PM -
Size of LSV locker - for ballast
By jchamlee in forum General ChatReplies: 1Last Post: 07-13-2004, 01:01 PM -
Ballast for Ski Locker 03 Mobius
By Bigairdad in forum Boat OwnersReplies: 3Last Post: 07-07-2003, 09:56 AM