Results 1 to 2 of 2
10-20-2005, 04:24 PM #1Member
- Join Date
- May 2005
Adding a Ballast System in Ski Locker
During the "off season" I am going to add a ballast tank to the ski locker in my Mobius LS. My plan is "T" off the existing pump in the engine compartment to go to the ski locker and then "T" into the bilge pump line to pump the water out.
My question to those who have the ballast system in the ski locker is how do you get the 2 lines (in and out) from the engine compartment to the ski locker? I believe there is an existing hole with some sort of plastic piece in the hole, do you use this or drill new holes? Needless to say, I am very nervous about drilling holes in my boat.
10-21-2005, 10:40 AM #2Senior Member
- Join Date
- Sep 2002
Replying to Topic 'Adding a Ballast System in Ski Locker'
AZ_Calling, It is just a plastic tub that lines the ski locker, you can pop right through it with a hole saw. Follow your battery cables it should give you an idea of what you are dealing with.
By iaonbb in forum General ChatReplies: 8Last Post: 11-22-2006, 02:37 PM
By pickle311 in forum General ChatReplies: 2Last Post: 01-27-2006, 05:25 PM
By e420x in forum General ChatReplies: 5Last Post: 09-28-2005, 04:38 PM
By jchamlee in forum General ChatReplies: 1Last Post: 07-13-2004, 02:01 PM
By Bigairdad in forum Boat OwnersReplies: 3Last Post: 07-07-2003, 10:56 AM