Loose tower bolts

[clark]

Make sure to check all of your tower bolts. They may seem to be OK from checking the outside by tightening with a phillips screwdriver, but don't trust that alone. Not a single nut was tightened all the way and some of them I could turn with my fingers. I just bought the boat new this year. Surely wakeboarding hasn't loosened them that much. You will need an 11MM deep well socket.

Clark

[Buttafewcoe]

But do not overtighten or we will be seeing cracks in the gelcoat.
.
Hope this helps
.
Butta

[smokedog2]

yep, mine were loose as well mis summer but I had checked them new and semi regular and I believe they did work loose. I tried to get them tight but not too tight, I was afraid too tight might also crack the gel coat. Anyone have some torque advice here?

oops distracted for hours and Butta beat me.

SD2