Results 1 to 2 of 2
  1. #1
    Join Date
    Aug 2005
    Posts
    4

    Default Tach inop on my 99 Outback

    I have a 99 outback with a 5.7 PCM 310hp carburated. The tach does not work. The red lights inside work but the tach needle won,t move. All other gauges work fine.

    Any Ideas?
    Bob (gdyupngo)

  2. #2
    Join Date
    Apr 2003
    Location
    Powhatan, VA
    Posts
    316

    Default Replying to Topic 'Tach inop on my 99 Outback'

    Mine is same year, though Indmar 5.7.

    Tach wasn't waterproof. Got a little moisture in it about two years ago. Needle started binding at about 2000 rpm for a while, then after a few months, stopped moving.

    Been running without for 2 years. Hour meter still works, though.

    I think loss of motion was caused by corrosion inside in our case. Needs a new tachometer--- about $125 or so.

Similar Threads

  1. Tach problem
    By rshea99 in forum Service & Repair
    Replies: 2
    Last Post: 07-17-2007, 12:52 PM
  2. Tach not working
    By 98outback in forum Service & Repair
    Replies: 4
    Last Post: 05-12-2007, 07:00 AM
  3. Tach goes haywire
    By pls4912 in forum Service & Repair
    Replies: 3
    Last Post: 04-26-2006, 03:40 PM
  4. speedo's leaking tach n hour meter dead
    By DOCDRS in forum Service & Repair
    Replies: 2
    Last Post: 07-06-2005, 10:10 PM
  5. Trouble With Tach
    By Bobby in forum Service & Repair
    Replies: 3
    Last Post: 03-04-2003, 12:45 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •