Results 11 to 13 of 13
Thread: winterizing
-
11-01-2012, 02:00 PM #11
The total parts list is as follows:
(2) 4"x4" Flex Couplings
(2) 4"x2" PVC wyes
(2) 4" PVC female end caps and (2) threaded caps
3' of 4" PVC - although you won't need it all
(2) 2" 90's
(1) 2" wye
3' of 2" PVC
12' 1 1/4" ID tube
(6) gallons of RV antifreeze - When I was finished I had (5) gallons remaining in the tub
Don't forget a couple fall craft beers of course!
I would also recomend putting a bulkhead fitting in the bottom of the tub w/a valve to transfer the antifreeze back into the containersLast edited by muehlcj; 11-01-2012 at 02:03 PM.
'06 Outback - Gone but not forgotten
'13 Mojo
-
11-01-2012, 02:17 PM #12Junior Member
- Join Date
- Oct 2012
- Posts
- 2
thanks for all the tips
-
11-01-2012, 02:36 PM #13Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
I use this for my boat & basement.. I installed a perko flush kit in the boat and used a 5 gallon bucket with the pump..
http://www.northerntool.com/shop/tools/product_792_792http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead