Results 1 to 10 of 12
Thread: Gauges Falling Out!
-
10-25-2012, 12:31 PM #1Senior Member
- Join Date
- Aug 2007
- Location
- Alpine, Utah
- Posts
- 191
Gauges Falling Out!
The wholes in the dash panel on my 07 Mobius LS have worn a bit and now an number of the gauges are following are falling out through the inside. I bought some bevels to go around them to make wider, but they aren't wide enough. Anyone else having this problem? Any idea where I can get some wider bevels to stop this from happening?
GarnGarn
2007 Mobius LS (Direct Drive)
-
10-25-2012, 01:20 PM #2
You have any pics showing what is going on.
Patrick
'08 Mobius LS. 4 Blade OJ 13x13 Prop.
Kenwood KMR440U & RC107MR, T600-2 Rockford Fosgate powering 2 Liquid Acoustics 8" HLCD, Kicker SKM10 subwoofer
5 light- light bar. 2015 RAM 3500HD Dually 6.7 Diesel w/ Aisin 6 speed tranny
Live life today!
-
10-25-2012, 01:23 PM #3
Yeah, pics would be nice...the gauges are just held in by a bracket on the back of them...and the bracket just presses against the backside of the dash according to how tightly screwed down the bracket itself is. Check the back side of the gauges that are giving you trouble and make sure that the brackets are screwed down tightly. Also make sure that the legs of the brackets are bent outward enough such that they "catch" the dash and aren't coming through the hole with the gauge.
===================================
2005 Moomba Mobius LSV
-
10-25-2012, 01:25 PM #4
Not sure what would work and still look good.
have you priced out a dash pieceHey, Its Moomba time
Its all about the dash - enjoy the dash, as that is your time between the dates
13 Mobius LSV-sold
08 Mobius LSV-sold
03 Mobius LSV-sold
life is about finding the balance between being a responsible adult and staying young at heart
-
10-25-2012, 03:48 PM #5Senior Member
- Join Date
- Aug 2007
- Location
- Alpine, Utah
- Posts
- 191
It is definitely that the holes are too big. There has to be some kind of bevels that can go around the gauges to keep them from falling through the holes. Changing the entire dash? I really don't want to do that if I don't have to. I don't know if I would even dare attempt that myself.
GarnGarn
2007 Mobius LS (Direct Drive)
-
10-25-2012, 04:43 PM #6
Make some LED rings like Ian has done for the cupholders
Sent from my iPad using Tapatalk HD
-
10-25-2012, 04:48 PM #7
I guess I don't understand how the holes could be too big. Have they always been too big, or is it something that has happened over the years?
===================================
2005 Moomba Mobius LSV
-
10-25-2012, 06:29 PM #8
Maybe the gauges shrunk?
-
10-26-2012, 10:31 AM #9Senior Member
- Join Date
- Aug 2007
- Location
- Alpine, Utah
- Posts
- 191
Yeah, that's it! The gauges shrunk! *LOL* It looks like the holes were originally cut too big. Its only on a couple of gauges: depth and tach. When I bought the boat it didn't come with a depth gauge. So I had the dealer install a depth. Its the worse out of all of them. It has fallen right through the dash so it was just dangling. I actually found some bevels at http://www.livorsi.com/catalog/bezels.htm#fl_bezel and installed them. But I need something even bigger - that's how big the hole is. Any ideas?
Wolfeman, what do you mean by LED rings?
GarnGarn
2007 Mobius LS (Direct Drive)
-
10-26-2012, 11:39 AM #10
Ian has posted up how he made some LED light rings fot the cupholders in this thread:
https://forum.moomba.com/showthread....xiled.../page2
I was thinking you might be able to do something similar to create a custom bezel that would prevent the gauges from falling thru the dash.