Results 1 to 5 of 5

Thread: Switch Covers?

  1. #1
    Join Date
    Jun 2012
    Location
    On a NorCal Lake Somewhere!
    Posts
    536

    Default Switch Covers?

    I saw Harmsway's post about some custom switch covers that looked awesome by the guys at OTRATTW.
    1. Are my switches below the right ones? Sorry for the poor cell phone pic!
    2. If so, any suggestions on the PerfectPass switch?
    3. And do I just yank the covers off? or what is the correct way to remove the switch cover?


    Thanks for any help, Eric.
    Attached Images Attached Images

  2. #2
    Join Date
    Sep 2012
    Location
    Chattanooga, TN
    Posts
    110

    Default

    Yes, it looks like your switches are the right ones. I think, though, that otrattw only etches black switches, so your new switches would be black.

    On the Perfectpass switch maybe the switch for "cruise"? I'll try to find one in a bit.

    The covers pop off if you work them carefully with a small slotted screwdriver. If you want to wait, though, otrattw sends you a special little plastic removal tool.

    There's also this thread for more discussion on this...

    https://forum.moomba.com/showthread....light=contoura
    ===================================
    2005 Moomba Mobius LSV

  3. #3
    Join Date
    Sep 2012
    Location
    Chattanooga, TN
    Posts
    110

    Default

    OK, here is a cruise control icon, in this document, page 38, top left. You can have them put that icon and the words "PERFECT PASS" if you want.

    http://www.carlingtech.com/sites/def...s-Markings.pdf
    ===================================
    2005 Moomba Mobius LSV

  4. #4
    Join Date
    Jun 2012
    Location
    On a NorCal Lake Somewhere!
    Posts
    536

    Default

    Quote Originally Posted by dhyams View Post
    OK, here is a cruise control icon, in this document, page 38, top left. You can have them put that icon and the words "PERFECT PASS" if you want...
    Dhyams, thanks. I was just posting these better pics when I saw your responses!!

    Thanks again, Eric.

    Switches (3).jpgSwitches (1).jpg

  5. #5
    Join Date
    Sep 2012
    Location
    Chattanooga, TN
    Posts
    110

    Default

    Good deal...note that otrattw's switches will also not have the red lenses. See this thread for pics of what they will look like:

    https://forum.moomba.com/showthread....light=contoura

    In case it will help you out, this is exactly what I sent to otrattw (formatting is a little messed up, but you get the gist):

    ================================================== ========


    I'd like to order these, all Contoura V rocker switch covers, no indicator bars except as noted.


    WORD IMAGE NOTES
    ================================================== ===========
    NAV/ANC D2
    BILGE AJ
    BLOWER AF
    STEREO 2F
    AMP speaker icon from here: http://www.otrattw.com/proddetail.php?prod=VVPZC2G-500
    LIGHTS AC indicator bar on top and bottom
    ACC A5 indicator bar on top and bottom


    I got the picture codes from this document: http://www.carlingtech.com/sites/def...s-Markings.pdf
    Last edited by dhyams; 11-06-2012 at 09:20 AM.
    ===================================
    2005 Moomba Mobius LSV

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •