Results 1 to 4 of 4
Thread: Lake Scum
-
08-08-2005, 10:23 PM #1Member
- Join Date
- Dec 2003
- Location
- Texas
- Posts
- 56
Lake Scum
CLR worked great on cleaning water spots off the side of the boat but not so good on cleaning the lake scum (dried on 7 days) on the bottom of the boat. Does any one have any great ideas that do not require a lot of elbow grease?
The BleuRue
-
08-09-2005, 08:00 AM #2
Replying to Topic 'Lake Scum'
Go to Walmart or your local boat dealer. Buy "Hull Cleaner". There are several brands available. This stuff works like magic. It is strong and made of acid, but really gets the scum off quickly. There is no scrubbing involved. I would wetting the boat before using it, and definitely wash the boat afterwards. This stuff can't be good for you wax job, but it will sure remove the scum.
ClarkClark
2017 Moomba Craz
Raptor 400
Pacific Blue / Graphite
1st - 1983 old brown boat - not sure the make
2nd - 2001 Bayliner 185 4 cyl. Sold
3rd - 2005 Moomba Möbius LSV. Sold
-
08-09-2005, 09:46 PM #3Senior Member
- Join Date
- Feb 2004
- Posts
- 168
Replying to Topic 'Lake Scum'
I use a bathroom cleaner called "The Works" Spray it on wait a minute and wash off.
-
08-10-2005, 09:53 PM #4Senior Member
- Join Date
- Dec 2004
- Location
- Cinci-Dayton
- Posts
- 1,014
Replying to Topic 'Lake Scum'
I rub the boat down in the water and finish off before I leave the ramp. Well worth the time. I do not even drive the mile to the cabin. Get it off ASAP.
SD2Naked red and white 2005 Moomba LSV
Teaching my kids to Ride, Shoot Strait and Tell the Truth
Similar Threads
-
Ready to hit the Lake!!!!!!
By tazz3069 in forum Pride & JoyReplies: 2Last Post: 06-24-2007, 04:14 PM -
A Day At The Lake
By tazz3069 in forum General ChatReplies: 2Last Post: 04-30-2007, 07:40 PM -
Lake Cumberland
By smokedog2 in forum General ChatReplies: 26Last Post: 08-20-2006, 08:39 AM -
use of outback v on my lake
By snobo in forum General ChatReplies: 4Last Post: 07-27-2006, 09:28 PM -
Lake
By mpgbama in forum General ChatReplies: 5Last Post: 05-11-2004, 09:48 AM