Results 1 to 10 of 38
Thread: 2013 LSV lewisb13 stereo build
Hybrid View
-
10-11-2012, 08:27 PM #1Senior Member
- Join Date
- Jun 2010
- Location
- Lake Houston
- Posts
- 656
2013 LSV lewisb13 stereo build
Let it begin....
uploadfromtaptalk1350001666225.jpg2013 LSV
2005 LSV - SOLD
-
10-11-2012, 10:17 PM #2
Sweet wheres the cabins
Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
10-11-2012, 10:23 PM #3Senior Member
- Join Date
- Jun 2010
- Location
- Lake Houston
- Posts
- 656
I think I'm undecided on this issue. I might blow up the stockers first. I kind of want so see how far they can be pushed compared to the db651 I had in my 05. I'll do them eventually for sure.
2013 LSV
2005 LSV - SOLD
-
10-12-2012, 06:51 AM #4
off to a good start, keep the photos coming with the progress
Hey, Its Moomba time
Its all about the dash - enjoy the dash, as that is your time between the dates
13 Mobius LSV-sold
08 Mobius LSV-sold
03 Mobius LSV-sold
life is about finding the balance between being a responsible adult and staying young at heart
-
10-12-2012, 08:43 AM #5
Everything looks great but im slightly concerned about the Bolt cutters...
Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
10-12-2012, 04:41 PM #6
-
10-12-2012, 04:53 PM #7
Ever heard a honda civic with a big coffee can tailpipe rev up compared to a ferarri?
I'm jealous of that channel to route wires under the floor. So much nicer than having to drill, tuck and hide while you twist and contort your body into positions that would rival most Cirque du Soleil acts.So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
10-12-2012, 09:15 AM #8Senior Member
- Join Date
- Jun 2010
- Location
- Lake Houston
- Posts
- 656
Those are crimpers.
2013 LSV
2005 LSV - SOLD
-
10-12-2012, 10:02 AM #9
-
10-12-2012, 11:24 AM #10Senior Member
- Join Date
- Jun 2010
- Location
- Lake Houston
- Posts
- 656
I dont think Ill be doing any crimping in the cubby. Just need to crimp the terminal on the piece between the dist block and the battery switch, and then again one crimp between the dist block and the ground on battery 1. Both crimps can be done outside the cubby. Ill try to post pictures as I go. Im gonna start here in a couple hours.
2013 LSV
2005 LSV - SOLD