Results 1 to 6 of 6

Thread: Swim platform!

  1. #1
    Join Date
    Mar 2017
    Location
    Dothan, Al
    Posts
    8

    Default Swim platform!

    needing a little help i have looked all over the internet trying to find a swim platform. Went to load my boat up last summer this passed summer and noticed mine was gone, i kept avoiding not fixing the clip i had on their and it bit me. Can someone point me in the right direction to where i will be able to find one closest to original as possible?
    Last edited by msnellgrove213; 03-05-2018 at 07:08 PM.
    2003 Moomba Outback Ls

  2. #2
    Join Date
    Aug 2011
    Posts
    2,522

    Default

    Order the brackets and then make it out of Hdpe plastic or teak wood. Otherwise it's gonna be very expensive. There's threads on here with lots of designs.
    http://www.instgram.com/jlyons30
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV - Sold
    2017 Moomba Craz - Enzos, Lead

  3. #3
    Join Date
    Apr 2014
    Location
    Owensboro, KY
    Posts
    204

    Default

    I have a factory Platform off a 2008 Moomba that I would sell. PM me

  4. #4
    Join Date
    Apr 2013
    Location
    Knoxville TN
    Posts
    3,065

    Default

    Quote Originally Posted by parrothd View Post
    Order the brackets and then make it out of Hdpe plastic or teak wood. Otherwise it's gonna be very expensive. There's threads on here with lots of designs.
    I like the HDPE route. I assume the teak would be pretty expensive new, unless you could find a used teak platform and modify it. The guys on the supra forums are doing this type reno on the older boats.

    For some reason, I like the teak on the MCs when they are oiled up.
    2018 Supra SL400

  5. #5

    Default

    Still have the platform?

  6. #6
    Join Date
    Aug 2012
    Location
    Morganton, NC
    Posts
    235

    Default

    Quote Originally Posted by Memphis Slim View Post
    Still have the platform?
    I have a stock black one in Western NC if you still need one. No brackets though.
    2008 OBV
    325 EFI with closed cooling
    Gravity III with 750's in the rear, 400 stock floor, 750 IBS
    Servo valve ballast upgrade
    Wetsounds Rev10
    JL Amps, WS420BT

    2000 Outback LS <-- Sold!!!
    310 Carb Direct Drive
    800# Rear Locker
    750# IBS (should have kept this for the OBV)
    Dual Batteries with 2 Bank Charger System
    Kenwood Head with Remotes
    Too many hours restoring exterior from prior negligence to count!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •