Page 12 of 17 FirstFirst ... 21011121314 ... LastLast
Results 111 to 120 of 165

Thread: Exiled...

  1. #111
    Join Date
    Nov 2003
    Location
    Land O Lakes, Florida
    Posts
    6,377

    Default

    Quote Originally Posted by ian ashton View Post
    Birch looks so nice too, one day maybe I'll stain a wood box instead of hiding it, lol.
    need my address ?
    Hey, Its Moomba time

    Its all about the dash - enjoy the dash, as that is your time between the dates
    13 Mobius LSV-sold
    08 Mobius LSV-sold
    03 Mobius LSV-sold
    life is about finding the balance between being a responsible adult and staying young at heart

  2. #112
    Join Date
    Feb 2008
    Location
    Traverse City, MI
    Posts
    2,680

    Default

    Test fitting the sub and led ring in/on the enclosure;

    2013 Outback V

  3. #113
    Join Date
    Feb 2008
    Location
    Traverse City, MI
    Posts
    2,680

    Default

    The sub is in the boat!


    Unfortunately I forgot to bring the "feet" for the box, zip ties, and long screws, so it's just kind of resting in place until tomorrow. Once it's in place I'll cut out a trim panel and cover it in white vinyl, and tuck/tie the wiring.
    2013 Outback V

  4. #114
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    8,419

    Default

    You take care of the IBS while that front vent was easily accessible?

  5. #115
    Join Date
    Feb 2008
    Location
    Traverse City, MI
    Posts
    2,680

    Default

    I forgot to reply to your pm! I'm not certain that we'll add any additional weight to the boat, but I guess anything is possible. The floor and box are super easy to pull out, so if we decide to go that route it shouldn't be too tough. I think the dealer is putting a heater in over winter, so all of this will have to come out anyway.
    2013 Outback V

  6. #116
    Join Date
    Feb 2008
    Location
    Traverse City, MI
    Posts
    2,680

    Default

    More progress on the sub - I got the box mounted into the boat last night, and put the grille on the woofer;


    I have a bit of clean up to do on the wiring on both sides still, but ran out of daylight;


    A few shots of the LEDs in darker conditions; they are really bright;


    Last edited by ian ashton; 09-26-2012 at 08:53 AM.
    2013 Outback V

  7. #117
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    6,368

    Default

    What did you use for the cup holder rings?


    Sent from my iPhone newtys droid killer using Tapatalk
    David

    2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights

    SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD

  8. #118
    Join Date
    Feb 2008
    Location
    Traverse City, MI
    Posts
    2,680

    Default

    Here is a post where I detailed how I made them. I have since gotten an actual router table to take a bit of the danger out of the process, lol.

    https://forum.moomba.com/showthread....275#post174275
    2013 Outback V

  9. #119
    Join Date
    Jun 2010
    Location
    Lake Houston
    Posts
    656

    Default

    Where did you buy the actual LED strips from? Your post talks about speaker rings from a guy at the boat show and then the LEDs for the cupholders you mention are "spares you had laying around."
    2013 LSV
    2005 LSV - SOLD

  10. #120
    Join Date
    Feb 2008
    Location
    Traverse City, MI
    Posts
    2,680

    Default

    I bought 3528 SMD LEDs on eBay. There are about 38372847282 million sellers. I think they are ~$20 for 16'
    2013 Outback V

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •