Results 1 to 10 of 12
-
09-04-2012, 01:46 PM #1
Had a good scare this weekend...water filling in engine compartment....
So I usually just read on the forum ,and not post , but have to share a pucker moment from this weekend...We were out with friends and their kids...started out surfing...Filled the center 400lb bag, then filled the 750lb rear bag...my friend was out surfing for 15 mins, to when I noticed the wake really changed and the engine belt squelling...he fell, so when stopped ,I popped the engine hatch and noticed it was full of water almost to the lip of the floor, opened V-drive and of course full...so got life jackets on the kids and immediately headed to a private dock, bilge pump was already on and immediately hit empty on my pumps...started looking at hoses and clamp connections all was good...we dock for 10 mins and all water was drained from the boat...I then popped my rear locker with the 750 lb bag and noticed that the connection of the "Elbow" from the hose had popped off and the entire bag emptied into the engine compartment...Some how during one of my turns to pick up the surfer the bag must have rolled enough to created enough tension on the hose to pop off the fitting...so new project ..to lengthen my hose a few inches...But what a scare....we did finish off the day surfing and tubing for the kids....
2008 Moomba LSV, Gravity III, 1100 port.750 in goofy side rear,400 center,650 IBS everything else stock.....Home lake... Glennifer Lake, Alberta Canada...
-
09-04-2012, 01:50 PM #2
Good thing you were paying attention! Biggest excitement we had this weekend was seeing a 2ft. water snake.
'08 Mobius LS. Sold
'18 Craz "TypeO"
REV10's, Revo6 xss, Kicker10, Kicker 12 CompR, various LED's
-
09-04-2012, 01:53 PM #3
My hose pops off from time to time. I just watch for excessive bilge pump operation. Is your bilge not auto?
2005 mobius lsv 2900lbs ballast2005 mobius lsv
-
09-04-2012, 01:56 PM #4
I had issues with the v drive fat sac fittings popping out. I think the engine heat can make it easy for the fittings to pop out.
I added some PVC glue to the fittings. No issues since.2018 Max with a little extra weight here and there
-
09-04-2012, 02:42 PM #5
Yup, regular inspections are a smart thing to do, even when everything is working properly.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
09-04-2012, 02:44 PM #6
Yea we usually keep the lockers open when filling the bags now
2005 mobius lsv 2900lbs ballast2005 mobius lsv
-
09-04-2012, 03:28 PM #7
-
09-04-2012, 04:20 PM #8
Lol I let it ride. Good setup tho
2005 mobius lsv 2900lbs ballast2005 mobius lsv
-
09-04-2012, 04:22 PM #9
-
09-04-2012, 04:23 PM #10