Results 1 to 8 of 8
Thread: full boat/tower cover?
-
08-25-2012, 01:10 AM #1
full boat/tower cover?
was looking for a new cover since mine was destroyed.....
http://www.ebay.com/itm/FULL-BOAT-TO...2da290&vxp=mtr
what do yall think?2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
Rockford fasgate cabins
Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
Exile XM7's
Exile Harpoon
Exile ZLD
Polk 10in sub (2)
Polk P330 amp (subs)
-
08-25-2012, 04:09 AM #2
didn't you have a buyer?
David
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
08-25-2012, 07:58 AM #3
Quit looking to spend more $ on what you have decided to sell. That cover will add $0 to your selling price for the boat. It may set yours apart from a similar one, but you are better off spending that $700 on some vinyl repairs. Or prop repair. Or strut repair.
Last edited by wolfeman131; 08-25-2012 at 08:00 AM.
-
08-25-2012, 03:34 PM #4
Second what wolfey said moto. Sell it and move on already kid
Sent from my home phone..Jason
Go Hard or Go Home.......it's MOOMBA time!!
2009 Moomba Mobius LSV
-
08-25-2012, 05:17 PM #5
i get what yall are saying..im just asking if yall have seen anything like it..i have only had 2 bites on the boat right now and if it doesnt sell by oct. then ill start saving up to fix it myself and sell it in the spring..dont worry about this haha..i did however have water in the boat and i looked the other day and found that 2 of the bottom bolts on one of the platform mounts fell out....so i bought attwood sealent, put new bolts in the holes and sealed all the bolts and around the mounts..so i have been spending money on her put little amounts under 50$..oohhh i have a brand new ACME 543 3 blade prop sitting on the boat right now..so all i need now is just the strut>>might have to go to a delaer since i cant find an aftermarket one and a new shaft
2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
Rockford fasgate cabins
Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
Exile XM7's
Exile Harpoon
Exile ZLD
Polk 10in sub (2)
Polk P330 amp (subs)
-
08-25-2012, 09:23 PM #6
Look into having the shaft & strut straightened if you go that route... It should save you some coin....
2008 LSV 1100s 650IBS Reversible Pumps w\Timers
-
08-26-2012, 01:14 PM #7
i know nettles does it..i might have to ask on a price
2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
Rockford fasgate cabins
Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
Exile XM7's
Exile Harpoon
Exile ZLD
Polk 10in sub (2)
Polk P330 amp (subs)
-
08-27-2012, 01:45 AM #8Senior Member
- Join Date
- Jun 2007
- Posts
- 883
i'm thinking it won't be that sturdy during any sort of wind
2006 Moomba Mobius LSV
Stereo: Kenwood KMR-D562BT
Ballast: 750 Surfside locker, 400 Surfside mid boat, 400 Gravity I, 400 Bow
Surfboards: Inland Surfer Red Woody, Triple X Composite X 58"[/SIZE]