Results 41 to 50 of 53
Thread: Our First Moomba Outback LS!!!
09-08-2012, 08:35 PM #41
Got my domed numbers on the boat today. They look pretty darn good! Thanks for the recommendation.
09-08-2012, 10:47 PM #42
Sweet. We really like ours...it was nice to get some pics on the water today. Took the old iPhone for a float to get some pics and turned out pretty good. Glad you like the domed reg numbers. I think it was a pretty good price for a great product.
Our Seadek teak platform will be here on the 20th. Can't wait to get that on... We just had our boat interior autocad so that we can get a price on Seadeking the floor.
09-09-2012, 12:38 AM #43
09-10-2012, 01:11 PM #44
Let us know what you do on the flooring-- with pics!My Mom said I'm not allowed to get wet!
2000 Outback LS (sold)
P5 Danielo Diamond 58"
12-28-2012, 05:26 PM #45Member
- Join Date
- Jul 2002
- Northern California (Seba
Would like to know when you start your carpet install as that is on my list just haven't found any info on replacing the carpet in an LS just the LSV. Great looking boat!Lake Bound
2002 Moomba Outback LS
02-24-2013, 09:09 AM #46
Ok, We started to get our LS ready for the summer. A small project is moving in to an overhaul, but well needed and fun. So here are a bunch of pictures of the process. We will continue to update you over the next week or two until we finish up and are water ready. Thanks for all the comments and look forward to any questions or comments.04 outback LS
02-24-2013, 09:22 AM #47
Getting Boat Apart & Cleaned
We are replacing all the lines and once we started to we found fresh water hoses kinked and debris in the oil cooler screen. Trans Mounts were in bad shape so we decided to re powder coat and install stainless hardware. We are also replacing all the fuel line, fresh water hose, wet exhaust hose, and ballast hose.
Last edited by Wake life; 02-24-2013 at 09:26 AM.04 outback LS
02-24-2013, 09:37 AM #48
02-24-2013, 09:41 AM #49
Here I have stripped the casting and getting ready polish, I also put new bushings in it. The trans mounts have been powder coated and new stainless hardware, and all the new hoses, new steering cable will be replaced as well since everything is off.
We are also machining a new drive shaft. It should be ready beginning of next week.
We also purchased a new prop and will get the old one will be rebalanced and freshened up for a backup.04 outback LS
02-24-2013, 09:51 AM #50
So I was able to get approval from the wifey...as I scanned Craigslist I found the Wetsound System I have wanted, but didn't want to spend $2200 on them.
Well a deal of $800...I had no choice but to get them...I will be taking the covers off to paint white, but this is a deal I couldn't resist!
The wifey said " Happy Birthday, Merry Christmas, Happy Easter, Valentines, Thanksgiving, and everything in between! You are covered with all the updates, changes, and purchases for the year."
I WILL TAKE IT...
The boat they were on...Mariah. I would take that too, but $50K is out of my reach...It was a bad ass boat for sure.04 outback LS