Results 51 to 60 of 64
-
05-06-2013, 10:38 AM #51
What were you guys using to shim the mount to the tower? I bolted mine on and when I put my boards on, had issues with the mount swiveling around.
2009 LSV Liquid Force Edition
- Gravity III - Upgraded 900lb rear locker
- Z5 Rack
- ACME 1847
- Polk MM6501UM - Kicker IX500.4
- Kicker CompVX 12" - Kicker IX1000.1
- Pair Wetsounds Rev 10s - JL Audio HD750/1
- RGB LEDs
-
05-06-2013, 10:56 AM #52
Any little piece of rubber, cut in small strips, lay it inside the bracket, then crank down on it till she's good and tight!
http://www.homedepot.com/p/DBHL-1-1-...0#.UYfEnMpu7nc
not this particular one, but just so you get an idea... any rubber coupling will do then you cut it what ever size you need2004 Outback Blue on White *Sold
2008 LSV Blue on White
EXILED with 6 SX65-M in cabin & 2 XM9s rockin the tower
2 Kicker ZX700.5 Amps powering the entire boat with 2 10" Subs under the dash
Krypt KMA4200 EQ under driver's side dash to control all the madness
Z5 Cargo Rack annnnnnnd She's NEKKKKED....
I'm no expert, I just read up on the Moomba Forum...
-
05-06-2013, 11:25 AM #53Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Re: Rotating Board Rack Suggestions for XLV
I cut this down and wrapped it around...
http://www.menards.com/main/mobile/f...585-c-6613.htm
Sent from my Nexus 4 using Tapatalk 2http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
05-06-2013, 11:38 AM #54
thanks...going to make a run to home depot today. Parrot I like what you did with the AC tubing for the surfboard rack. Noticed when I put a wakeboard in there, issues with it sliding around and slapping on the bottom board.
2009 LSV Liquid Force Edition
- Gravity III - Upgraded 900lb rear locker
- Z5 Rack
- ACME 1847
- Polk MM6501UM - Kicker IX500.4
- Kicker CompVX 12" - Kicker IX1000.1
- Pair Wetsounds Rev 10s - JL Audio HD750/1
- RGB LEDs
-
05-06-2013, 02:25 PM #55Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Wolfman or someone in this thread mentioned it, pool noodles...
Not sure what type of wake boards or surf boards monster design engineers use but the wake board rack is too small and the surf rack is too big.
For $125? I can deal with it...http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
05-06-2013, 02:44 PM #56
where the heck did you find a black or gray pool noodle!?? Only pool noodles I see are neon colors, blue, green, pink etc. I'm thinking some AC insulation like this would work on those forks.
http://www.homedepot.com/catalog/pro...17a041_300.jpg
And yeah at $125 a pop I can deal with it too. I wish I could mount the racks higher like moombadaze, but the combination of my Z5 rack and Rev 10s wont allow it.2009 LSV Liquid Force Edition
- Gravity III - Upgraded 900lb rear locker
- Z5 Rack
- ACME 1847
- Polk MM6501UM - Kicker IX500.4
- Kicker CompVX 12" - Kicker IX1000.1
- Pair Wetsounds Rev 10s - JL Audio HD750/1
- RGB LEDs
-
05-06-2013, 02:57 PM #57
Yep - that would work too. Look for the pipe insulation in about a 1/2" or so. I'd look for the uncut or unspliced so it will just slip over and you won't have to deal with any sticky mating edges.
I found different thicknesses of pool noodles too. Wally World, Target, etc. Mine HAD to be yellow thoughSo when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
05-06-2013, 05:21 PM #58Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Re: Rotating Board Rack Suggestions for XLV
Pipe insulation at Menard's..
Sent from my Nexus 4 using Tapatalk 2http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
05-06-2013, 05:48 PM #59
Are the stock forks a Monster product, or did those come from another company? The forks on these Monster racks look very similar, not to mention they are sized for the elongated oval bar that are on the stock towers (the somewhat newer stock towers that is).
2015 Supra SC400
08 LSV - Sold
Go big, or go home.
-
07-15-2013, 11:00 AM #60Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
I noticed today the color is starting to fade on my racks... They still work great and still a great deal for the $$$...
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead