Results 1 to 10 of 64
08-05-2012, 12:21 PM #1
Rotating Board Rack Suggestions for XLV
Just spent the past week on vacation at the lake. I'm getting tired of removing the wakeboards every time we tie up with our friends or dock the boat. It's just a matter of time before I forget to remove the boards and tear them up. Has anyone upgraded to rotating racks for the rad-a-cage tower? I have the Z-Cargo Bimini plus tower speakers so I need a rack that will attach a little lower on the tower or rotate up/down as well as inboard/outboard. I don't want to order the racks and find out they won't work well. Anyone with some good suggestions will be much appreciated!2009 Moomba XLV Gravity
08-05-2012, 01:28 PM #2
Moombadaze has the ones from Monster and I think they are fantastic! Solid build, can install anywhere on the tube, fully adjustable and the release is a handle instead of a pin. I hate the pins in mine.Drew
2016 Supra SA 450
2015 Supra SG 450
2012 Moomba Mojo
2008 Moomba OBV
08-05-2012, 09:51 PM #3
It looks like the pivoting racks on Monster only come in a black powder finish. I was wanting an aluminum finished racks. Saw some on Aerial but they're $430 apiece. Pretty pricey! Anyone with any experience with the Aerial racks?2009 Moomba XLV Gravity
08-05-2012, 11:09 PM #4
I ordered mine from Aerial and they are great. I too have the Z5 Bimini, and I have 2 on each side.2008 Mobius XLV, Z5 Rack, RockFord Fosgate Amps and 12" Rockford sub, DBoot5 8" & 6" Tower speakers, Kicker Amp and 6.5" interior speakers, Inland Surf, Hyperlite, Liquid Force, Aerial Swing Away Racks, Perfect Pass StarGazer, ACME 1235 and Evolution Cover.
08-06-2012, 09:35 AM #5
You got any pics you could post? Since you live in Wichita, I could even come and look at them if you didn't mind.2009 Moomba XLV Gravity
08-06-2012, 11:30 AM #6
I'm also interested in these...I still haven't found a good solution for racks that rotate all the way into the boat....I see Aerial says "nearly 180" degrees....can you help confirm what nearly is? if it's 165 or 170 that might work for me but my main goal is to get the boards all the way into the boat for pulling into the lift...have already messed up several racks pulling in on rough days. See attached pics...I tried a rack from Liquid Audio Sounds here in NC....didn't work for one reason...although they swivel into the boat far enough, they don't work on the rad-a-cage due to the curvature of the tube...in the position shown in these photos there is no issue...but as soon as you move the rack up the tube to get to a position I would want them, the way the hinge is designed it was impacting the tube so that I couldn't get the boards parallel to the water...so had to return these and still in search of a good, reasonably priced solution...swivel hinge.jpgrack too low.jpg'06 Mobius LSV
11-28-2012, 03:51 PM #7
Picked up a blem model from Monster Tower for $129. I think it looks just fine and feels beefy. Can't wait to bolt it to the tower. They only have 2.5" mounts but I think a spacer will solve the problem.
The masking tape is holding the tools so I don't loose them between now and install time.
ImageUploadedByTapatalk1354132150.195881.jpgImageUploadedByTapatalk1354132175.182680.jpgImageUploadedByTapatalk1354132202.583786.jpg2010 Moomba XLV
Gravity 3, wake plate
I have a love for ballast and large wakes.
1100 v-drive lockers
1180 under the playpen
+ lead and a collection of other ballast bags
11-28-2012, 10:33 PM #8
11-28-2012, 03:54 PM #9
Wish those came in silver instead of black...
Sent from my iPhone using TapatalkSOLD! 2011 Mobius LSV 325HP EFI
Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537
Board: '12 LF Harley (Monster) 139
Her Board: '11 Ronix Krush 128
Kids Board: '13 Ronix Vision 120
Skate: LF Faction 44
Surf: LF Custom Quad & XXX
2011 Toyota Tundra CrewMax TRD Magnetic Grey
3/1 Truxx Lift, and some other stuff...
11-28-2012, 04:49 PM #10