Results 1 to 10 of 18

Hybrid View

  1. #1
    Join Date
    Apr 2010
    Location
    saskatchewan, canada
    Posts
    334

    Default any body done a swivel seat on 05 lsv?

    Any body done a swivel seat on 05 lsv? This is a mod I would love to have on my boat
    2017 Helix

    Wakemakers 1050s
    Bow bag ( Surf edition)
    Autowake

  2. #2
    Join Date
    Sep 2009
    Location
    newnan, GA
    Posts
    437

    Default

    2005 mobius lsv

  3. #3
    Join Date
    Apr 2010
    Location
    saskatchewan, canada
    Posts
    334

    Default

    i read that this moring but my 05 driver seat is mounted to the floor.
    2017 Helix

    Wakemakers 1050s
    Bow bag ( Surf edition)
    Autowake

  4. #4
    Join Date
    Sep 2011
    Location
    Liberty, Mo.
    Posts
    38

    Default

    How hard is it to remove the seat? If you can take it out, then I would say the mod would be nearly the same. Only difference would be mounting it to the floor, but could probably put spacers between the aluminum plate and the floor. Or better yet you could tie in another mod by mounting the sliding rail to the floor and do the rest from there. Not sure what your seat back looks like, but if back is open you would have to check height and other variables to make sure seat could swivel without interference. Where there's a will...
    Scott
    '07 Mobius LSV
    Indmar Assault 5.7
    Gravity III- 1100 lb. in port locker, 2300 lbs total
    ACME 1617

  5. #5
    Join Date
    Apr 2010
    Location
    saskatchewan, canada
    Posts
    334

    Default

    I am gonna check it out this weekend as the boat is at lake, but I am buying the swivel in case it works. I am so surprised that no one has done this mod to my model of boat!
    2017 Helix

    Wakemakers 1050s
    Bow bag ( Surf edition)
    Autowake

  6. #6
    Join Date
    Aug 2008
    Location
    Cottage Grove, MN
    Posts
    780

    Default

    Quote Originally Posted by saskie99 View Post
    I am gonna check it out this weekend as the boat is at lake, but I am buying the swivel in case it works. I am so surprised that no one has done this mod to my model of boat!
    I did it on my '06 OBV, which I believe is the exact same boat. If I remember correctly, just pull up the main cushion on the seat and unsnap the vinyl on the leading edge of the seat, and it reveals the bolts to remove the seat. I used two SS plates, one to bolt the seat to, and the other to bolt to the slide rails. The swivel was sandwiched between the two plates. Other than that, it was very similar installation as this thread. I used the angled aluminum piece to elevate the rear of the bottom SS plate as well.
    2006 Outback V - Gone
    2008 LSV - Gone
    2013 other brand

  7. #7
    Join Date
    Sep 2009
    Location
    newnan, GA
    Posts
    437

    Default

    Quote Originally Posted by saskie99 View Post
    I am gonna check it out this weekend as the boat is at lake, but I am buying the swivel in case it works. I am so surprised that no one has done this mod to my model of boat!
    Never saw the need I guess. Don't know what you're missing if you've never had it lol

    2005 mobius lsv 2900lbs ballast
    2005 mobius lsv

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •