Page 1 of 3 123 LastLast
Results 1 to 10 of 22
  1. #1
    Join Date
    Jun 2007
    Posts
    883

    Default request: photo of back of stock deck on 06 LSV

    I am about 180 miles from my boat right now, any chance someone could snap me a photo of the back of the stock deck in a 06 LSV?
    2006 Moomba Mobius LSV
    Stereo: Kenwood KMR-D562BT
    Ballast: 750 Surfside locker, 400 Surfside mid boat, 400 Gravity I, 400 Bow
    Surfboards: Inland Surfer Red Woody, Triple X Composite X 58"[/SIZE]

  2. #2
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    8,419

    Default

    Snyder,

    Have 2 '08 LSV's sitting 100 ft from me I can take a pic of. Will that help? What, specifically, do you want a pic of?

  3. #3
    Join Date
    Jun 2007
    Posts
    883

    Default

    if it's the same deck, just the back of the stereo and the wires running from it.

    thanks!
    2006 Moomba Mobius LSV
    Stereo: Kenwood KMR-D562BT
    Ballast: 750 Surfside locker, 400 Surfside mid boat, 400 Gravity I, 400 Bow
    Surfboards: Inland Surfer Red Woody, Triple X Composite X 58"[/SIZE]

  4. #4
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    8,419

    Default

    Hmmmmm


    Don't know if it's the same. Do you know your model number?

  5. #5
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    7,692

    Default

    here is a pic of my keenwood 232 mr that came in my 2007 OBV should be pretty similar

    http://www.sonicelectronix.com/pictu...ture_id=112701


    here is the keenwood mr225 which i think came in the 2006 models page 26 shows the back

    http://www.kenwoodusa.com/UserFiles/.../KDC-MP225.pdf
    Last edited by jmvotto; 07-09-2012 at 08:54 AM.
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  6. #6
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    8,419

    Default

    Nice, JV!

    Let me know if you need more, Spyder.

  7. #7
    Join Date
    Jun 2007
    Posts
    883

    Default

    i was just hoping to see it wired up so i know what i'm up against
    2006 Moomba Mobius LSV
    Stereo: Kenwood KMR-D562BT
    Ballast: 750 Surfside locker, 400 Surfside mid boat, 400 Gravity I, 400 Bow
    Surfboards: Inland Surfer Red Woody, Triple X Composite X 58"[/SIZE]

  8. #8
    Join Date
    Apr 2008
    Location
    California
    Posts
    2,840

    Default

    A mess is what your up against! Seriously, the factory is not known for "clean' wiring so if it's never been touched back there it will be hard to decipher anything from a pic, not to mention that a straight on rear pic in an LSV is almost impossible due to space. What exactly are you trying to do?
    2007 Mobius LSV

  9. #9
    Join Date
    Jun 2007
    Posts
    883

    Default

    well, i have no car audio experience whatsoever.. just trying to figure out if it would just be a straight swap to upgrade to the Kenwood KMR-550U.

    like using existing wire harness and existing remote on drivers seat. just simply pulling out the old deck and putting in new one.
    2006 Moomba Mobius LSV
    Stereo: Kenwood KMR-D562BT
    Ballast: 750 Surfside locker, 400 Surfside mid boat, 400 Gravity I, 400 Bow
    Surfboards: Inland Surfer Red Woody, Triple X Composite X 58"[/SIZE]

  10. #10
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    7,692

    Default

    550u rear pic
    http://www.sonicelectronix.com/pictu...ture_id=933021



    looks like it will plug and play asumming the wiring for power ground and remote lead is the same, but when you compare the plugs the 232 has lots of blanks , so some of the functionaly of the newer unit wont be used unless you re wire the whole interface.
    Last edited by jmvotto; 07-09-2012 at 12:01 PM.
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •