Results 1 to 2 of 2
-
07-02-2012, 11:20 PM #1
Transmission Mount Bushing Replacement
Here is a short video on replacing the transmission mount bushing.
Tools 15/16"- 1" wrench, 2- 9/16 wrenches for alignment, come along with chains,feeler gauge, 1-2 beers
I noticed my rubber bushing had mushroomed so I purchased some new mounts from inboardonline.com for a cost of $8.61 each so I would have spares. Only needed one as I believe alot of the weight was being taken on the other mount. The culprit was a raised edge on the casting that trashed the rubber bushing. Checking of these mounts should be added to the summerization process.
Here is the video link.
.
. http://www.youtube.com/watch?v=qwc7iy5T3IcLast edited by DOCDRS; 07-02-2012 at 11:27 PM.
09 21v LAUNCH
99 Outback LS. Sold
run your engine after you change your oil
68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
Doug
-
05-19-2013, 09:05 AM #2
Transmission Mount Bushing Replacement
Any insight into what the bushing part number is that you replaced? The inboard online website is not working so I can't see what options there are. Also what extra parts might I need besides the top bushing? I have an 08 lsv.
Thanks in advance for any help.'08 Mobius LSV- SOLD!
2017 Mojo Pro