Results 1 to 2 of 2

Hybrid View

  1. #1
    Join Date
    Jul 2002
    London Ontario Canada

    Default Transmission Mount Bushing Replacement

    Here is a short video on replacing the transmission mount bushing.
    Tools 15/16"- 1" wrench, 2- 9/16 wrenches for alignment, come along with chains,feeler gauge, 1-2 beers

    I noticed my rubber bushing had mushroomed so I purchased some new mounts from for a cost of $8.61 each so I would have spares. Only needed one as I believe alot of the weight was being taken on the other mount. The culprit was a raised edge on the casting that trashed the rubber bushing. Checking of these mounts should be added to the summerization process.
    Here is the video link.
    Last edited by DOCDRS; 07-03-2012 at 12:27 AM.
    09 21v LAUNCH

    99 Outback LS. Sold

    run your engine after you change your oil
    68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies

  2. #2
    Join Date
    Jun 2009
    South West Colorado

    Default Transmission Mount Bushing Replacement

    Any insight into what the bushing part number is that you replaced? The inboard online website is not working so I can't see what options there are. Also what extra parts might I need besides the top bushing? I have an 08 lsv.

    Thanks in advance for any help.
    '08 Mobius LSV- SOLD!
    2017 Mojo Pro

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts