Results 1 to 9 of 9
Thread: Relocate |terminals for Battery?
Threaded View
-
06-25-2012, 11:54 PM #1
Relocate |terminals for Battery?
Somebody at Moomba thought it would be a good idea to drill in the middle of the storage hold on my Outback V and locate the starter terminals there:
I am half way through my Exile stereo install and am upgrading to a dual battery system. For those of you familliar with the Outback V you know there isn't a lot of room to maneuver and so I have to relocate the batteries to the opposite side of the hold. My question is, is it safe to drill a hole over by where the support along the walk through is bolted to the floor? (right hand side of the picture over by the battery box)
I am assuming that it's hollow under there but thought maybe somone on this board could confirm that for me before I take a drill to it. Either that or I have to remove the floor and see whether or not there is some kind of chase beneath that floor.
Thanks in advance!
Wade2011 President's Trophy - Check
2011 Western Confernece Champs - Check
2011 Stanley Cup Champs - Not so Much....
2007 Outback V