Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 31
  1. #21
    Join Date
    Mar 2011
    Location
    Belton, Texas
    Posts
    2,607

    Default

    Quote Originally Posted by rdlangston13 View Post
    Are standard hockey pucks the right size?


    Sent from my iPhone newtys droid killer using Tapatalk
    What kind of puckin question is that and how the puck is he suppose to know the puckin answer to that. -


    Sent from my home phone..
    Jason

    Go Hard or Go Home.......it's MOOMBA time!!

    2009 Moomba Mobius LSV

  2. #22
    Join Date
    Apr 2012
    Location
    Wake Forest, NC
    Posts
    875

    Default

    This is puckin crazy. Measure the cupholders, cut some PVC and epoxy it to the bottom of the cushion. But what the puck do I know?
    2018 Murder Max
    2008 Outback V-Bought new; sold in 2018

  3. #23
    Join Date
    Mar 2011
    Location
    Belton, Texas
    Posts
    2,607

    Default

    ^^^ need a like button.

    This puckin thread is so far off course it's just plain puckin funny


    Sent from my home phone..
    Jason

    Go Hard or Go Home.......it's MOOMBA time!!

    2009 Moomba Mobius LSV

  4. #24
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    8,419

    Default

    You Mother puckers better be real pucking careful or ole' RD may just decide to puck you up.

  5. #25
    Join Date
    Feb 2010
    Location
    Canton, Ga / Lake Lanier
    Posts
    1,600

    Default

    Shut the puck up and go to pucking bed!!


    Sent from my iPhone using Tapatalk
    SOLD! 2011 Mobius LSV 325HP EFI
    Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537

    Board: '12 LF Harley (Monster) 139
    Her Board: '11 Ronix Krush 128
    Kids Board: '13 Ronix Vision 120
    Skate: LF Faction 44
    Surf: LF Custom Quad & XXX


    Tow Rig:
    2011 Toyota Tundra CrewMax TRD Magnetic Grey
    3/1 Truxx Lift, and some other stuff...

  6. #26
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    8,419

    Default

    This pucking thread has just gone straight to H, E, dbl-hockey sticks.

  7. #27
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    6,368

    Default

    I tried to build a pucking tower camera mount out of PVC and had no pucking luck finding the right size!


    Sent from my iPhone newtys droid killer using Tapatalk
    David

    2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights

    SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD

  8. #28
    Join Date
    Jun 2009
    Location
    South West Colorado
    Posts
    788

    Default

    Quote Originally Posted by parrothd View Post
    Can you post up more info on the wind block?
    Ok, a few more photos of the wind block.

    I used 1/2" hdpe (cutting board type product) and had to spend some time carefully measuring and cutting to get the tapered shape (top to bottom) correct in the opening when closed.
    ImageUploadedByTapatalk1340559340.327962.jpg
    ImageUploadedByTapatalk1340559464.627390.jpg

    A simple set of stainless hinges works perfect.
    ImageUploadedByTapatalk1340559503.327424.jpg

    Simple slide bolt that slides into a hole drilled in the drivers side wall and a rubber grommet superglued in to stop it from rattling.
    ImageUploadedByTapatalk1340559655.476373.jpg

    Lastly, I used a router to round off the outside edges so it does not hurt too much if you catch it on the way to the bow.

    It fits perfect under the center window when closed and really cuts out the wind. (see photo from the beginning of thread).

    One of the best mods I have done- according to my wife...
    '08 Mobius LSV- SOLD!
    2017 Mojo Pro

  9. #29
    Join Date
    Aug 2011
    Posts
    2,522

    Default

    Quote Originally Posted by moombahighrider View Post
    Ok, a few more photos of the wind block.

    I used 1/2" hdpe (cutting board type product) and had to spend some time carefully measuring and cutting to get the tapered shape (top to bottom) correct in the opening when closed.
    ImageUploadedByTapatalk1340559340.327962.jpg
    ImageUploadedByTapatalk1340559464.627390.jpg

    A simple set of stainless hinges works perfect.
    ImageUploadedByTapatalk1340559503.327424.jpg

    Simple slide bolt that slides into a hole drilled in the drivers side wall and a rubber grommet superglued in to stop it from rattling.
    ImageUploadedByTapatalk1340559655.476373.jpg

    Lastly, I used a router to round off the outside edges so it does not hurt too much if you catch it on the way to the bow.

    It fits perfect under the center window when closed and really cuts out the wind. (see photo from the beginning of thread).

    One of the best mods I have done- according to my wife...
    Thanks!.....
    http://www.instgram.com/jlyons30
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV - Sold
    2017 Moomba Craz - Enzos, Lead

  10. #30
    Join Date
    Feb 2013
    Location
    Friendswood, TX
    Posts
    33

    Default

    Quote Originally Posted by moombahighrider View Post
    Ok, a few more photos of the wind block.

    I used 1/2" hdpe (cutting board type product) and had to spend some time carefully measuring and cutting to get the tapered shape (top to bottom) correct in the opening when closed.
    ImageUploadedByTapatalk1340559340.327962.jpg
    ImageUploadedByTapatalk1340559464.627390.jpg

    A simple set of stainless hinges works perfect.
    ImageUploadedByTapatalk1340559503.327424.jpg

    Simple slide bolt that slides into a hole drilled in the drivers side wall and a rubber grommet superglued in to stop it from rattling.
    ImageUploadedByTapatalk1340559655.476373.jpg

    Lastly, I used a router to round off the outside edges so it does not hurt too much if you catch it on the way to the bow.

    It fits perfect under the center window when closed and really cuts out the wind. (see photo from the beginning of thread).

    One of the best mods I have done- according to my wife...
    Is it sturdy enough for a passenger in the center position to lean against?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •