Results 1 to 10 of 11
Hybrid View
-
06-11-2012, 08:57 AM #1Junior Member
- Join Date
- Jun 2012
- Posts
- 5
Idle fine - stall and die when put in gear - 2001 moomba
I have a 2001 Moomba Outback and over this past weekend, every time I put the boat in gear, it would
stall and die. It would idle fine. Is this an electrical issue? I have already replaced the solenoid and
problem still existed...Any insight? Any help is much appreciated!!!
-
06-11-2012, 10:22 AM #2
Are you sure nothing is jamming up your prop?
-
06-11-2012, 10:25 AM #3Junior Member
- Join Date
- Jun 2012
- Posts
- 5
Yes - It would turn off after about a 30 second idle. I changed the solenoid and it idles fine - now just dies after gear is engaged...prop is clear...
-
06-11-2012, 10:49 AM #4
What is the RPM at idle. Did you treat your gas prior to winter storage?
Kraig - 2010 Outback V
-
06-11-2012, 11:02 AM #5Junior Member
- Join Date
- Jun 2012
- Posts
- 5
Did not document RPM at idle but as owner, I know the sounds of the boat and the boat sounds great. It just acts as if
something is shutting the engine off when I engage it in gear...like a kill switch almost...yes I treated gas...
-
06-11-2012, 11:13 AM #6
Next question, can you rev the engine when you push in the transmission lockout?
Kraig - 2010 Outback V