Results 1 to 6 of 6
Thread: I need a prop size suggestion
Hybrid View
-
06-05-2012, 10:20 PM #1Junior Member
- Join Date
- May 2012
- Location
- Rockton, IL
- Posts
- 12
I need a prop size suggestion
Hello,
Hoping i can pull from the vast knowledge of the forum members. I have just become a Moomba owner and would like to purchase a new prop. When the boat was running(long story, hope to have resolved soon) i had a slight vibration, i'm assuming the prop is bent enough to be causing the issue, shaft looks straight while running a fake lake. Instead of having the current prop rebuild i thought i would just upgrade to an Acme prop.
What size does everyone suggest for a 2001 Moomba Outback which will be used mainly for
Wakeboarding?
-
06-06-2012, 09:24 AM #2
How much ballast do you run? Do you have the 310 motor?
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
06-06-2012, 10:16 AM #3Junior Member
- Join Date
- May 2012
- Location
- Rockton, IL
- Posts
- 12
only running 400 pounds of ballast with the 310 carb motor..
2004 Moomba Mobius LS
2001 Moomba Outback
1990 Malibu Mystere
-
06-06-2012, 10:31 AM #4
Have a look at this thread. Consider giving Nettles a call. Eric at OJ can be extremely helpful as well.
https://forum.moomba.com/showthread....hlight=nettlesMy Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
06-07-2012, 10:53 AM #5
-
06-07-2012, 06:45 PM #6
like i asked before just like you..it all depends on the fat sacs your running and things you want to do..and stated above and in my thread..just call nettles and the guys and they will give you the best advice
2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
Rockford fasgate cabins
Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
Exile XM7's
Exile Harpoon
Exile ZLD
Polk 10in sub (2)
Polk P330 amp (subs)