Results 41 to 50 of 63
Thread: Loose steering
-
08-03-2014, 05:57 PM #41
Loose steering
Went out surfing for about 3 hours and the steering felt sloppy again and after investigating the rudder link opened up again .
1\8 play in the bushing gave me about 1-1\2 in the wheel I think it needs to be welded so it doesn't open .2012 Mobius LSV
05 Outback LS SOLD
-
08-03-2014, 07:43 PM #42
I wonder if there is just a smaller bushing that can be purchased to take up the slack??
David
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
08-03-2014, 08:31 PM #43
Loose steering
The bushing is built onto the bolt I'm thinking of getting it tack welded so it doesn't open
2012 Mobius LSV
05 Outback LS SOLD
-
08-03-2014, 09:32 PM #44
I wonder if they just have a newer design out now that holds tighter that you get for cheap.
David
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
08-04-2014, 08:01 AM #45
Went out all day Sat. and didn't get a chance to look at mine yet. Wonder if a small clamp around the outside might work.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
07-20-2015, 05:00 PM #46Member
- Join Date
- Jun 2008
- Location
- Northern Indiana
- Posts
- 54
FYI, pulling boat and taking to the dealer to try and resolve the "loose steering" steering wheel backlash issue. I will post how it goes. Very frustrating!
2011 LSV
Loaded, 340 HP
-
07-20-2015, 06:06 PM #47
Is the end of the steering cable just a fixed pinned connection or does the cable end thread onto the cable?
Sean
2004 MOOMBA Mobius LS
1987 Kawasaki JS-550 (What was I thinking?!)
2004 Kawasaki STX-12f
2002 Kawasaki STX-R (BrAaAaPp!?!)
2007 Kawasaki Ultra LX (shhh... it's got a vortech )
2001 Toyota Tundra (Long Travel Tow Vehicle )
Checkout my LED project here!
-
07-20-2015, 07:57 PM #48
Loose steering
Pin i believe
Sent from my iPhoneDavid
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
07-22-2015, 12:39 PM #49Member
- Join Date
- Sep 2010
- Location
- Camp on pool 8 of Allegheny River (Adrian, PA)
- Posts
- 64
Is there packing material in the mechanical seal for the rubber as there is on the drive shaft seal? Could this be a contributing factor? Video on YouTube made some similar statements.
I have these same issues and have a new steering cable and rack assembly which I am changing tonight on the 2003 Outback.2003 Outback
Boat name = Lynn Syndrome
Its a condition that runs in the family...Judy Lynn (mother-in-law) Heather Lynn (wife) & Megan Lynn (daughter)...no known cure...but the boat helps
New boat for me on 10/9/10.
-
07-22-2015, 12:41 PM #50Member
- Join Date
- Sep 2010
- Location
- Camp on pool 8 of Allegheny River (Adrian, PA)
- Posts
- 64
Sorry I meant RUDDER.
2003 Outback
Boat name = Lynn Syndrome
Its a condition that runs in the family...Judy Lynn (mother-in-law) Heather Lynn (wife) & Megan Lynn (daughter)...no known cure...but the boat helps
New boat for me on 10/9/10.