Page 1 of 2 12 LastLast
Results 1 to 10 of 31

Hybrid View

  1. #1
    Join Date
    Jun 2011
    Posts
    113

    Default Wet Sanding Results

    Here's a before and after shot of the Outback. Cell phone pics don't really do it justice. It had heavy oxidation, and bad ghosting behind the factory decals when I pulled them off.

    This is after wet sanding from 600-800-1000-1500-2000 grit, then Turtle Wax Rubbing Compound, then Meguiars Ultimate Compound; Both applied with a Rotary Polisher from 1000-2000rpm. Still have a final wax coat to apply after I get all the new decals on. Turned out pretty nice, my first turn at using a rotary polisher, realized orbitals have no place in my garage now!

    2012-04-05_07-12-34_624.jpg

    2012-05-12_13-12-13_252 - Copy.jpg
    Brandon

    2000 Moomba Outback LS
    2001 American Skier LazAir Edition
    1991 Ski Tastic Inboard

  2. #2
    Join Date
    May 2009
    Location
    North End Lake Lanier GA
    Posts
    8,155

    Default

    Impressive man, so i assume you started with the lower number paper and went up to the 2000? Did you wet sand it by hand?
    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
    [COLOR="#696969"]

  3. #3
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    8,419

    Default

    I saw that shine in the motor install pic and meant to comment on it. Looks fantastic!

  4. #4
    Join Date
    Jun 2011
    Posts
    113

    Default

    Thanks, I'm looking forward to getting the actual wax on and seeing the final results. I have those chrome decals still, transom went on great, I'm going to try the side ones and see if I can't get a decent result.

    Yep, started at 600 and finished with 2000. Each grit went one direction, so once I moved on to the next grit I'd sand until I could no longer see the perpendicular scratches. The wet sanding was done by hand with a #20 foam sanding pad.
    Brandon

    2000 Moomba Outback LS
    2001 American Skier LazAir Edition
    1991 Ski Tastic Inboard

  5. #5
    Join Date
    Jun 2011
    Posts
    113

    Default

    Was able to get the decals on today. The sides were a pain, I ended up with a couple bubbles underneath. All in all I think it turned out well, doesn't look like a 2000 anymore!

    2012-05-13_18-59-42_910.jpg

    2012-05-13_18-59-53_395.jpg
    Brandon

    2000 Moomba Outback LS
    2001 American Skier LazAir Edition
    1991 Ski Tastic Inboard

  6. #6
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    8,419

    Default

    Ha! My 4yr old son is sitting next to me and when I pulled up the pics he said, "Whoa! That's a cool, black Moomba!"

    Really looks great Brandon. Keep us posted on the motor install.

  7. #7
    Join Date
    May 2007
    Location
    Richmond, VA
    Posts
    2,102

    Default

    Quote Originally Posted by keehr22 View Post
    All in all I think it turned out well, doesn't look like a 2000 anymore!
    Brandon - That's a super looking Outback. Nice work! - Deerfield
    2007 Outback - SOLD June 2016
    2012 RAM Crew Cab
    2015 Subaru Forester
    Stuart

    "When you first start out with something new, you're always a little uptight." - Don Rickles

  8. #8
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    8,419

    Default

    Quote Originally Posted by motosno963 View Post
    looks nice where did you get the decals..i want to upgrade my 04 decals to newer ones
    Since Brandon mentioned it, I set up a group buy on the decals at Atlanta Marine. Call Cynde & she will hook you up.

  9. #9
    Join Date
    Mar 2010
    Location
    Irondequoit Bay, NY
    Posts
    1,372

    Default

    sorry for jacking your thread ha..but idk..its eather just the decals or doing a wrap(if i get the money)
    2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
    Rockford fasgate cabins
    Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
    Exile XM7's
    Exile Harpoon
    Exile ZLD
    Polk 10in sub (2)
    Polk P330 amp (subs)

  10. #10

    Default

    Brandon

    Boat looks awesome. Im wet sanding my blue Outback and it sucks!!! I started with 800 and then 1000 but cant seem to cut enough to get rid of ghosting where decals were. Werent you afraid to go through the gel layer?

    Any guidence would be appreciated.

    Kirk
    Last edited by Elite Marine; 05-24-2012 at 09:06 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •