Results 1 to 10 of 16
Thread: Any ideas??
-
05-03-2012, 04:37 PM #1
Any ideas??
I have the old xtp racks on my Moomba and I cannot keep the rubber inserts in them. I have tried just about everything. I was wondering if anybody has ever coated there racks in rubber and what materials they have used.
-Mark
14 Mojo - 72 hours and growing
02 Mobius LSV ---- Sold and always will be remembered as the one that started it all.
"Hey you only live once"
-
05-03-2012, 04:52 PM #2
gorilla glue with a very small clamp to apply pressure while drying?
'06 Supra Launch 20SSV-gone but never forgotten
-
05-03-2012, 04:55 PM #3
-
05-03-2012, 05:03 PM #4
-
05-03-2012, 08:52 PM #5
Id try some contact cement and slide it on wet and let cure over night
Sent from my comodor 64
-
05-03-2012, 09:45 PM #6
Weather strip adheasive. Coat both sides, let it dry then coat both sides again and stick them together.
PWI as usual...
-
05-03-2012, 09:49 PM #7
-
05-03-2012, 11:29 PM #8
Clear attwood marine sealant at wally world worked great on mine, I used clamps to hold tem over night
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
05-03-2012, 11:42 PM #9
Nice thread. Was thinking the same thing before season starts. Hate to mess with them again another year being loose and all.
2007 Moomba Outback - going, going, GONE
2015 "NOT A MOOMBA"
Why Not? Play Hard! Get wet
-
05-03-2012, 11:47 PM #10
Yes, would like to rubberized my trailer safety chain and anchor.
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold