Any ideas??

[New Guy]

I have the old xtp racks on my Moomba and I cannot keep the rubber inserts in them. I have tried just about everything. I was wondering if anybody has ever coated there racks in rubber and what materials they have used.

[sandm]

gorilla glue with a very small clamp to apply pressure while drying?

[Dusty's Mom]

I was wondering if anybody has ever coated there racks in rubber and what materials they have used.

Used latex a couple times but the boys usually like the whip cream and chocolate.

[chawk610]

Used latex a couple times but the boys usually like the whip cream and chocolate.

Looks like we have a new member to welcome!

[parrothd]

5200 adhesive?

[New Guy]

I might try the plasti-dip I'll report back with results.

[jpetty3023]

Used latex a couple times but the boys usually like the whip cream and chocolate.

Bwahahaha, that's my girl.


Sent from my home phone..

[lsvboombox]

Id try some contact cement and slide it on wet and let cure over night


Sent from my comodor 64

[newty]

Weather strip adheasive. Coat both sides, let it dry then coat both sides again and stick them together.

[lsvboombox]

Weather strip adheasive. Coat both sides, let it dry then coat both sides again and stick them together.

This trigger a thought. What about mounting them how you would mount a set of golf grips. Two sided tape and use a alcohol two wet it. Slide on the rubber covers and let the alcohol evaporate