Results 1 to 10 of 16
Thread: Any ideas??
Hybrid View
-
05-03-2012, 04:37 PM #1
Any ideas??
I have the old xtp racks on my Moomba and I cannot keep the rubber inserts in them. I have tried just about everything. I was wondering if anybody has ever coated there racks in rubber and what materials they have used.
-Mark
14 Mojo - 72 hours and growing
02 Mobius LSV ---- Sold and always will be remembered as the one that started it all.
"Hey you only live once"
-
05-03-2012, 04:52 PM #2
gorilla glue with a very small clamp to apply pressure while drying?
'06 Supra Launch 20SSV-gone but never forgotten
-
05-03-2012, 04:55 PM #3
-
05-04-2012, 07:57 AM #4
-
05-04-2012, 10:51 AM #5Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
5200 adhesive?
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
05-04-2012, 04:36 PM #6
I might try the plasti-dip I'll report back with results.
-Mark
14 Mojo - 72 hours and growing
02 Mobius LSV ---- Sold and always will be remembered as the one that started it all.
"Hey you only live once"
-
05-03-2012, 05:03 PM #7
-
05-03-2012, 08:52 PM #8
Id try some contact cement and slide it on wet and let cure over night
Sent from my comodor 64
-
05-03-2012, 09:45 PM #9
Weather strip adheasive. Coat both sides, let it dry then coat both sides again and stick them together.
PWI as usual...
-
05-03-2012, 09:49 PM #10